Hello, I want to buy a used fanuc spindle motor model number is A06B-1012-B200. I know it is rated for 11kw continous/ 15kw 30min and max 4500rpm I am trying to find a manual/ datesheet etc but...
Type: Posts; User: AFAIK
Hello, I want to buy a used fanuc spindle motor model number is A06B-1012-B200. I know it is rated for 11kw continous/ 15kw 30min and max 4500rpm I am trying to find a manual/ datesheet etc but...
I had the same problem too. I think they have installed the easyjquery antispam that has caused the login problem for a few people. I'm using Firefox with a few addons and I finally found out that a...
I have a large spindle project too but I am lucky that the manufacturer sent a 100 page manual to me.
Anyway to give you some ideas mine has 5 air lines in the spindle, 3 of them are air/oil lines...
Well I got a reply from AMD technical support:
I sent them:
My 5 year old PC was loud and slow but at least programs always worked :(
EDIT:
I did check using Asus online PSU calculator and I do have enough power also other applications such as games work find so I don't think the GPU is damaged.
I removed all drivers and did a fresh...
My driver was at 11.10 which is their newest non-beta driver, I downloaded their latest beta driver from the website you posted and still the same problem. The exact message is "Display driver AMD...
I've been using sketchup for a while but since I have got this new PC it just crashes my graphics driver and wont load or it may load but performance is extremely poor. So I decided to upgrade to a...
I have looked in the alarm history on the drive and before the encoder alarms there is alarm 32 which is over-current I also checked the 5v rail to the encoder and it is 4.76volts is that too low for...
I have been through those pages and the whole PDF but I didn't see anything mentioning any extra pins and the wiring section is the same as the drive manual.
I bought 2 Mitsubishi MR-J2-100a servo drives from eBay a long time ago but I didn't have any servo by Mitsubishi for testing them. I have now got a Mitsubishi HC-SF202b servo motor (I know the motor...
The stupid layout that was in the last version is still there. Does anyone know a way to change it to how it was before? (I think version 3.6 was the last one with the normal layout?)
What about buying a used T-slot table from ebay etc?
Or maybe fixing some aluminium T-Slot extrusion to your existing plate? Might be a bit too weak though.
Thanks for the info, I still not sure why it is leaking or if it even should be. From what little info I have been able to obtain about this spindle, the pressure for the oil/air is 5-7 bar and there...
There is a lot of oil leaking out of all 3 power cables, the earth cable and I think some of the sensor cables too. :eek: Do motorised spindles with oil/air bearings do this normally?
I have...
Thanks for the reply jsheerin. The filter that comes with it blocks 99.7% particles that are 5 micron or greater, so it can do 3000ppm, Guess I will have to buy a much more costly coalescing filter...
Hi all.
I bought a HCS-200 18000/15 spindle manufactured by GMN for pretty cheap as they thought it was broken.
Short specification is on page 36 of the PDF:...
Is this the thread?:
Power scraping. Anyone tried to convert a Makita HK0500 for metal? - Page 2 - Practical Machinist - Largest Manufacturing Technology Forum on the Web
Pictures start on...
Would there need to be much modification to make these designs work for AC servos?
andycorlene, have a look at kjn ltd they sell the profile and all the extras, they also cut and are based in the UK.
KJN - Suppliers or Aluminium Profile and Accessories
The Jena Tec looks interesting, pity their webshop doesn't work.
I got my ballscrews and Abbatech linear rails/blocks from MBT:
http://www.motionandbearing.co.uk/Home.html
I got my servos...
I sent two emails to touchstonefloors for the 3-4mm grading curve, I have received no replies. I've had a look on the internet for other sources to no avail, so I am going to see what I can find...
ckelloug,
I have not found the aluminum oxide in the size I need yet. Could more quartz be used or some other material instead of the aluminum oxide? I have found another site that has quartz in...
30% Agsco #6 Al2O3 [ 3.360 mm ]
10% Agsco #4 quartz [ 1.680 mm - 0.590 mm ] ( 94% --> 1.680mm - 0.840mm )
27% Agsco #2 quartz [ 0.590 mm - 0.177 mm ] ( 89% --> 0.500mm - 0.250mm...
asuratman
I plan to make the mill yes, I wont be starting to make it until the design is OK, I'm kinda waiting on others to see what they think as I've never worked with E/G before.
I plan to cast ground steel or aluminum into the E/G and then mount linear rails to them.
Hello, I have posted a few times already about this in the E/G thread with some helpful replies, but was recommended to make my own.
Here are some pictures of the design I had come up with:
...
Hey rotary, thanks for that comment, I think I have fixed it now.
http://img714.imageshack.us/g/cncv3c.png/
I have had to make it a bit smaller due to not having anywhere to put it without...
Hey again.
Greybeard,
Thanks for that idea regarding the concrete post and slabs, had a look around and it will cost me around £50-£100 for all three (price difference is due to me not deciding...
Hello all.
I have been following this thread for a long time and have decided that I want to make a mill out of E/G. I've come up with a rough design for how I want it, but I don't really know if...