Search:

Hi there, I made a same post under Commercial CNC Wood router "Exitech routers" but there is no response so far.
I am a full time joiner/wood worker in Sydney Northern Beaches area.

I have a...

Hi there, I have a Exitech SHG 1212 Router.
It has been few years since I bought it and it has been working OK till now.

I have a issue with stack Y axis.
When I'm trying to move Y axis using...

Hi Guys
Thank you for all the information.
I found another one too.
StippleGen - Evil Mad Scientist Wiki

Hi Luke
I have tried Jason's free programs.
It was exactly what I wanted.
I have done my lovely dog ready to engrave now !
Thank you for your help.
Cheers,
Tak
233314

Hi there
I found some nice photo engravings on wood and want to find out what kind of software can create the tool path for it.
These are called " Photocarver "
I have 4' x 4' cnc router and...

Thanks Guys for the information.

I downloaded Gearotic motion free trial.
It seems to be pretty good and $75 is good price too.

I also downloaded the one from Emachineshop but I could not...

I'm searching for the programs to design gears for wooden clocks.

So far I found
1,Gear template generator
Gear template generator program
and
2,Gearotic motion
Gearotic Motion

Does...

This is great work. well done!
I've been searching for the electromagnetic power unit.
Did you make it from scratch? Would you mind sharing with us how to make it.

Thank you for your help.
My DSP still working fine.
I have to reset my XY0 because limit sensor was bent.
Problem was the black plastic dust cover on Y axis was jammed between the sensors.

I found an English DSP manual which I have downloaded from this forum.
Here is the copy.
====================================================

Home Setup
Home Function
“Home” is the machine...

I have Excitech SHG1212 with DSP controller.

When I turned the machine on today, as usual DSP asked me for"GO TO HOME ?" then instead of hit the "OK" key I pressed the wrong button.
Then I lost...

I have Excitech SHG1212. I have it for 18 month.
I had a lots of issues when I bought it from Jerry.
Though the machine is still working without major problems so far.....

Now I've got a small...

I just found very cool thread here.
http://www.cnczone.com/forums/woodworking/11996-cool_mdf_panels.html

Hi, everybody
Could someone lead me to the right direction for carving the panels like the photo attached.
I'm using V-carve pro and Rhino(novice).
V-carve has texturing tools but not allow me to...

More information came through from Excitech.
Please note that those settings are for
Excitech SHG 1212 late 2009 model
DSP + Delta VFD-M inverter

I have set the parameter according to the info...

Problem solved !
I had a reply from Excitech.(It was very quick indeed !)
Machine is now working perfectly.(I think )

The settings I needed to change were

INPUT SPINDLE ST 2e NUMBER: to INPUT...

Problem solved !
I had a reply from Excitech.(It was very quick indeed !)
Machine is now working perfectly.(I think ;))

The settings I needed to change were

INPUT SPINDLE ST 2e NUMBER: ...

Hi,Folks
I need help resetting the DSP to be able to control the spindle.
Is there anyone who can help me out over the phone?
I'm in Sydney.
Please PM me if anyone can help (preferably someone in...

Woodcam
I have SHG1212 late 2009 model.

My spindle set up is same as Inuk's.

INPUT SPINDLE ST 2e NUMBER:
LINES STATE WHEN SPINDLE IS OFF: DOWN DOWN DOWN DOWN
LINES STATE WHEN OF 1st GRADE...

I've done "inner format" today.

After formatting DSP, all the parameter went back to default automatically.
Only setting I have to change manually is "Pulse equiv"
They were XYZ : 400 400 400...

Thanks Inuk, Iris
I'll do little more research and give it a go tomorrow.

Inuk

Thank you for your help.
I bought my machine SHG1212 just a year ago.
My DSP version is
Initial Version
RZNC-D5416/3/L30
1.2(ZHB59)
34152
Normal Version

Thanks Inuk
Does Inner format just reset settings and cutting files ?
It doesn't format firmware ?
And can it be done with dsp pendant(handset) ? no need to connect to PC ?

Big S,Woodcam
Thank you for your kind reply.

I have actually tried to read the file from USB memory which has loads of other files in it. That could have caused the problem.
I will try to...

Sorry Guys
One I mentioned in my original post "SanDisc" DOES NOT comply with DSP.
Not even that it corrupted DSP configuration.

Please refer beermans thread "USB problem Excitech"for further...

thanks woodcam
The problem is I have no control of the machine since I have used incompatible USB.
With my original USB stick DSP can read the program but doesn't do the job correctly.
G-code...

woodcam
Have you sorted out the problem?
I'm having same problem.
I have started new thread.

below is the copy
///////////////////////////////////////////////////////////////////
I have...

I have deleted "inner file" through
>>>advance pro set up
>>>file maintenance
>>>delete
Once I selected inner files and hit OK button, DSP displayed "deleted"
But It still show the broken file...

I have Chinese Excitech router with DSP.
I have a problem with DSP.
It was working OK last time I used.

I tried to load the file using new USB memory stick today.
When I selected U-drive to...

I heard many people in the forum trouble finding a compatible USB memory stick for Chinese DSP controller.

I have Exitech router late 2009 model with DSP.

I just bought a SanDisc " Cruzer Micro...