Greetings,
Now I am very close. I need in C programming to be able to do precise Coordinated motion? So that both axis move together and stay exactly in Sync.
I am going to put the init and c...
Type: Posts; User: jeffserv
Greetings,
Now I am very close. I need in C programming to be able to do precise Coordinated motion? So that both axis move together and stay exactly in Sync.
I am going to put the init and c...
Thanks... we pulled the control backplate completely out of the machine and brought to the shop... and built the control there. Then back to the customers and installed.
Not completely running...
Thanks Tom,
Got back into the tuning and figured out what was happening.
Back Story: When I first installed the board into the new control panel, it all work well at my shop. At the...
Greetings,
Making progress. Have built an all new control. Wired up the valve system. Attached is the file I am running the machine with. As well as the init____.c file I am using. Not...
I would buy this from you... I can use for a test bench in my shop.
Jeff Redington
[email protected]
I am using 3 different Potentiometers as inputs. I will use 1 analog output to supply the 10vdc to the three pot's.
Then the first pot. and analog input will be used to scale the dwell time after...
Next thing I am wondering?
How can I scale an analog input. The input is 7 to 1907. As wired with a potentiometer. I want that input to be scaled to 0 - 100. How can I do that?
Thanks!
Thanks so much!
I am getting something accomplished now! This is working!! Of course I will modify to the specifics according to the machine.
I will be using the the Kflop and Kanalog control...
Tom,
Yes that was a typo! Go figure!!
See here for what I want to accomplish to start. This will get more complicated later, with a fast and slow speed input. Not worried about that yet!
...
Greetings,
Working of a program with Home Limit Input Bit 1034, Peddle for Go which is Input 1033, and Lower limit which is Input 1035.
This is for a simple punch machine control. Using...
Thanks Tom... looks good to me! Will give it a go!!
- Jeff
Greetings all,
Press Brake with Linear Encoders with a Reference Mark: How to wire to Kanalog Board. I have wire in incremental Encoders before.
Is there documentation as to how to wire a...
Did you ever get the parameters, or the results you need? I am trying to install a new A1000 on a CNC and to am having problems with Rigid tapping and Spindle orient?
Thanks for any help! can you...
OK,
I have been able to narrow down the problem to Velocity settings. My setting for Rapid Max Velocity works. However the C# settings for what I thought was Feed Rate Velocity limit.... was...
OK,
Did some more testing... and it is definitely something I changed in the code. Has something to do with how I am doing the Initialization, and when.
I was loading and executing the...
OK, I have my BlueCNC4 which has worked well for years now, which is a C# .net cnc software, running on the KFlop. Using ver. 433.
I did some upgrades to the software. Added some buttons... And...
Laser Cutting CNC Machine using Camsoft CNC Plus! Camsoft Flat Panel which is easy to use and setup!!
CNC Plus is a Great System!! We like this system with a Galil Motion Control.
Did this...
Nice work, would be interested to see your Servo tuning settings when your done!
Jeff
Plasma CNC Retrofit: CAMSOFT CNC PLUS: Galil Motion Control: 2 of 2.
Here find the remainder of the video, Part 2 of 2
https://www.youtube.com/watch?v=uJ7T_KCjksA&t=5s
Here I am giving great feedback for Camsoft CNC Plus, with the Galil Motion control. This is a great software for a retrofit job!
In these videos I explain how I built the control panel, and made...
Greetings,
I have purchased a LattePanda 4G Ram 64GB: mini computer... and I am testing this, for use as a machine control.
Win 10 Driver: On Windows 10 Enterprise 2016 LTSB (IoT)
The...
Tom,
This worked, and corrected the problem... my other systems, must use a different output for Spin. on/off control.. .thus it never showed up.
M0 was the winner!!!!
Thanks so much,
-...
Greetings,
I have a problem, on one of my machines; which I have my GreenCNC3 3 axis software. This is KFlop with a KStep board. Running a small CNC milling machine.
On all my other...
True Machine Design, Rome, GA. and True Machine Automation, Ferndale, WA.... offer retrofit of CNC Machines with their own software and Dynomotion Controls. As well we are a Camsoft CNC Pro....
This Control panel, has KFlop, with a C10 Board, a custom connection cable, and KMotion 4.33. RedCNC2L runs on the KMotion system.
This is a South Bend 9" Lathe build during the World War 2. ...
Hi All,
Over the winter, I built this Wire Processing Robot; to make wires for the UL508a panels we build at True Machine Automation. May turn 4 days of wire making into approx. two days.
This...
Thanks,
I got it, it was a new install on a new computer... and I just needed to re-establish the KMotion .dll file in Visual Studio... then it was fine. Not sure why... but going fine.
-...
Tom,
GV.curfr = KM.CoordMotion.Interpreter.SetupParams.FeedRate; //Get Current FeedRate to display on screen of GoldCNC5.
Here is how I have been getting my current feedrate, if I change it,...
I am trying this... as a test of FRO with the Kmotion.exe GCode program... I probally don't know how to implement... can you help me with how to use?
OK,
I admit, that FRO could be used. After thinking about it, I could set the Standard Feed rate to "F1000". Then use my auto program to set it to 750, 500 or whatever it should be.... I will...