G'day all, would anyone have a cloned file for a hard drive for MP6100y 2003 model that they would share or sell. Thanks
Type: Posts; User: sudsy
G'day all, would anyone have a cloned file for a hard drive for MP6100y 2003 model that they would share or sell. Thanks
I've never had any luck at all using TNC Remo at all for some reason
Well i tried that but still no joy. I can't pick both sketches with a guideline and when i pick the sketch i have to do it one section at a time and then i get a error message saying to pick a...
Thanks Peter, i will give that a try
Won't let me screen shot. I tried posting the file earlier but didn't work. Will try again and see what happens.
Ok managed to upload a file. What i want to do is make a body the shape of the 2...
G'day all,
not sure if i described the title right. I am trying to redesign a water bridge a water bridge for a project motor. I need to move the thermostat housing at 45 degrees an about 80mm...
Double post for some reason
Thanks PRKP. I did manage to find another way but your way is what i was after. I kept looking in dimensions thinking that would be the obvious place. Thanks again
G'day all,
As title says I'm trying to create a drawing from a part and have managed to do that but will only dimension in inches. I can't seem to find where to change it. Part was modelled in mm....
Mazak 6100y twin spindle with live tooling. Bar feeder and bar receiver. Had a new spindle on head 2 2 months before being de-commissioned.Has errors and need parameters reset. Had new SSD hard drive...
I have a 6100y in South Australia. Will PM you my number
I'm guessing he doesn't come here any more. He didn't reply to my question and only has one post
After i reinialized it and it loaded Fusion i loaded the parameters manually apart from head2 which i couldn't access. I then powered down again and back on and got the frozen screen again
G'day all,
I have a multiplex 6100y with Fusion control that freezes up. It has a new hard drive and when first fitted booted to windows and then on to Fusion no problems. I then went to load the...
G'day guy's,
I've got a bus error on a QT18 that i have been trying to sort out. Does anyone know of where i can find the explanation of the bus error or how to locate the address in the error....
You may have to re-initialise the machine. Leave it on for a while first to charge the batteries or change the batteries before re-initialising.
All sorted
As per title i have a problem with the next tool. Doesn't matter if i am in a program or in MDI it always picks the same tool that is on the screen. I have tried doing manual tool change and also in...
How much are you asking?
You don't mention what you are actually selling and you have 5 posts. You may be legit but the way it's all worded reads scam to many
Where abouts are you located?
Yes im aware of forum etiquette but also aware that you get told to do a search before posting so when the mention of the Moxa came up in my search i asked the question here. Sorry if i offended...
RTS and CTS are jumpered on both ends and DTR, DCD and DSR are jumpered on the machine side 25 pin
I know this is a bit older thread but i am trying to get a Moxa Nport working on my Eumach mill with Heidenhain TNC360 control. I could never get it to connect to with RS232 TNC Remo or server...
Just for anyone interested i finally managed to connect to cnc but not with Heidenhain TNC Remo or server. I tried Easy dnc remo and used 3 wire cable and works fine. Tried TNC Remo and server again...
Just for anyone interested i finally managed to connect to cnc but not with Heidenhain TNC Remo or server. I tried Easy dnc remo and used 3 wire cable and works fine. Tried TNC Remo and server again...
Yes i tried the old board after changing the caps but same original error. I could hear a humming which i knew wasn't right thats what made me check the ballscrew. I had felt the motor when i saw the...
G'day Alan,
just for your information. The Z axis started giving a bit of a shudder and found that a parameter on the axis drive relates to that. The parameter on the actual machine is Q4. I...
Well that didn't last long. After i got it going again was running properly no problems. Haven't run it for a couple of weeks. Fired it up yesterday and now i get error 17 Faulty board. Not sure why...
I don't understand why it would have been fine when i shut down and no good when i started up again. I don't want to spend on another board for the same thing to happen. I tested the motor for shorts...