This may be what you are looking for, please post your results.
Type: Posts; User: jalessi
This may be what you are looking for, please post your results.
Here is an old school Chevrolet logo, have a most awesome afternoon!
Jeff...
What is so difficult and what else needs to be done with this?
Ryke,
Did you mean 1969 Boss Mustang? Please confirm year.
Have a most awesome evening!
Jeff...
The tattoo posted will not cleanly convert to a DXF for plasma cutting purposes.
Good clean artwork will have to be designed from scratch.
If you would like the work done, send a private message...
Rob1225,
Welcome to the Zone, please post an image of your finished project.
Jeff....
sintratech,
DXF as you requested, the quality is marginal, hope it helps you.
Jeff...
msimpson99
The Chinese version is about $10.00 per set (male and female) including shipping.
See attached link:
http://tinyurl.com/yxabnsju
...
There are hundreds of knifes already on Grabcad, see attached link:
https://grabcad.com/library/tag/knife?page=1&per_page=100&time=all_time&sort=recent
Have a most awesome evening!
Jeff...
Ken,
How are you sending a test to RDWorks without CorelDraw installed?
Please explain in detail, step by step, what you are doing, so that I can replicate the issue.
Jeff...
Ken,
In programs and features is only one version of RDworks installed?
Ken,
Unfortunately I have seen users that have installed another version of RDworks first and had the error you are experiencing.
The solution I have found is to completely remove all versions...
Did you try the 8.01.26.exe version of RDworks?
Ken,
Certain versions of RDworks have compatibility issues.
1: View the attached video https://screencast-o-matic.com/watch/cF1i0NFcZv
2: Download and install this version of RDworks ...
Vic,
Post the file and maybe someone will be able to help you.
Welcome to the Zone,
Jeff...
I completely agree with what Gerry said, please post information about what software you are using so someone here may provide pertinent information, direction and help.
Jeff...
What software did you use to create the STL?
1: Convert STL to DXF
2: Scale DXF to desired size
Have a most awesome evening!
Jrezironworks,
See attached file for the DXF you requested.
Please post an image of your finished project.
In the future you may want to post your requests for art in the dedicated following...
Fatcaaat,
Unfortunately it takes a fraction of a second for the driver to come out of power (sleep) reduction mode, during that fraction of a second position loss may occur, I personally have...
You may want to consider implementing some sort of counterweight system using pulleys and weights behind the column.
Weights can easily be added to fine tune balance.
...
Very poor at maintaining position when subjected to heavy loads.
Fatcaaat,
The coupler you linked to is not very good, they wind up and unwind when subjected to heavy loads.
See attached images of couplers that are far superior.
Jeff...
Fatcaaat,
Please post a image of the motor coupler on the Z axis of your machine.
Welcome to the Zone,
Jeff...
Hopefully this helps someone, please post a image of your finished project.
Jeff...
Denis,
Calibrate the axis with the longest possible measuring standard such as a 48" machinist ruler.
See attached link:
...
Todd,
You did not mention if you are using stepper or servo motors however as a rule of thumb Gecko suggests 2/3 of the motors combined amperage .
If you have stepper motors on all four axis...
Juli,
See attached link for good information on nesting laser designs:
https://www.ponoko.com/blog/how-to-make/definitive-guide-nesting-software-laser-cut-designs/
Welcome to the Zone,
...
Ivan,
Something doesn't make sense, are you sure you are contacting the right company?
The Vectric online store has Aspire software priced at $1,995, why are they are asking you for triple the...
John,
Link to additional drivers:
https://www.nvcnc.net/nvum.html
Look near the bottom of the web page.
Jeff...