Search:

Thanks All,

I'll try that when I get down to the shop, maybe a few days, getting old is h**l.

zavateandu,

I have a PCMCIA card adapter to CF card. CF card is 32MB but can't seem to be able to backup files on the Fanuc 0i-TA controller. Do I have to go out and a true PCMCIA card. Old tech...

Thanks zavateandu


I'll try that. It just that I remembered the tool number was on the display at all times. One other question, is there a way to output the PMC ladder to my computer?

Hi All,
It was a long dinner, but went over the manuals. Even down loaded manuals on the turret servo amp (Mitsubishi MR-J2S-100A-s046). After trying this and that finally was able to set it...

Can't help I have a different servo

what model is your servo amp. not the controller?

Have you considered anodizing?

Hi everyone,

I'm looking for an inexpensive turning simulator. Look at G wizard but can get it setup for a lathe (Fanuc oi-t controller) also have Bobcrap with there version of predator editor...

Thank you for the reply. What you have indicated makes sense now that I think about it. I guest I was chasing my tail, A nebe thing. Saw on the web that M03 is CW but didn't know which way to look at...

Hi All, Happy holidays!

I have a Hyundai 250C lathe, entered a M03 code and the chuck, as you look at from the turret, runs counter clockwise M04 clockwise. This is a Fanuc Oi-ta contoller. Can...

Found the battery dead on the servo!!! After replacing the battery I checked the parameters, (lucky that the Technical Data Sheets were with the system) nothing was changed. Went to the maintenance...

Just powered up a Hyundai Hit 250C lathe and the turret not turning. Found an error code on the servo amp of AL25 (Absolute position lost). How do I reset this error?

Hi Al the Man,

Yes. Did get manuals, if that what you call them, Translation isn't good but can read them. The item about the turrrt switch went off to something about the tailstock. Was looking...

Thanks Al The Man.
Hyundai hit250c with fanuc oi-tc. there is a switch on the front lable tool select cw/ccw and a push switch in the center of it. When pushed here a clunck but turret does not turn...

Hi everone,

I am a newbie to the CNC seen. Sent one of my kids to Penn Tech for machining to mayby to teach this old dog a few new things on a cnc lathe. He left to live girlfrend before showing...