Hey Guys...
About the EMHI editor... I was able to download it.. but never to get it working.. .I don't know how well it's supported.. or if they even use it.
Each machine will be different. ...
Type: Posts; User: Frankmali17
Hey Guys...
About the EMHI editor... I was able to download it.. but never to get it working.. .I don't know how well it's supported.. or if they even use it.
Each machine will be different. ...
The entire SYNTEC 6mb backup.. will be created by the controller and ZIPPED up.. and shouldn't need more than 1 MB.. on my machine.
Joey,
It is usually not just a matter of changing on thing, or one parameter. The ladder, macros, and registry info has to be changed.
If your manufacturer won't help.. than I would suggest...
Yes, i did add a pneumatic valve and solenoid to shut off the air supply to the constant pressurization port.
That also required air pressure regulator to reduce the pressure to the proper PSI. In...
Hello Yurtman,
You should be able to PM me...
I think the Backup you are referring should do it...
It should be a zipped file/files.. that I will have to unpack and look around in.
First...
I'm 100% Sure I can help.. but I can try.
You must understand that there is a lot of programming under the surface... and that is why it's hard to get a competent anyone from a...
Here is my 2 cents about this.
First, Syntec doesn't limit the offset/difference between the probe-to-table to anything in particular.. unless, a syntec programmer/configurator does so.
Second,...
SO does anyone have a machine with a Chinease ATC spindle?.. weather it's an HSD knockoff or not.. doesn't matter.
How about anyone with a watercoolled ATC spindle?
What has your experience...
the spindle may be a little week... and the acrylic may be melting on.. causing even more load
if there are OTHER experienced SYNTEC Operators,
Please feel free to share your expertise.
BE ADVISED:
To really get into working on these SYNTEC controllers there are 2 major challenges, and this is why I see so many machines not set up correctly, or people receive machines from...
If you can get to the sections of the Diagnostic Screen you will find things such as:
I-Bits : these are various physical / virtual inputs
O-Bits: have mostly to do with physical / virtual...
There are multiple "layers" to SYNTEC 6MB and 6MA
"HARD-CODE" there is some basic coding/operating structures similar to a computer MotherBoard and BIOS
"parameters" are mostly Hard Coded ...
For Starters. While SYNTEC is an industrial Controller manufacturer.. The controllers are meant to be used by DIY users.. and it is not meant to be easy to set up.
It was set up a long time...
THIS will be a thread setup to share info and files that may be helpful to those that are fixing/correcting/diagnosing their SYNTEC controlled machines.
Hello...
O89 is tied to I89...
Which is th F5 button.
Is it assigned to something right now? A lot of machines use it for tool measuring.
You need to use outputs 0 to 15 and then tie the...
checking the connections on the back of the controller would be a must.. if not already done..
HSK vs ISO is debatable... Most 9KW HSD spindles I see (long or shortnose) use ISO30.. for woodworking routers.
12000RM.. is an option..
You can get them in 18000 and 24000RPM...
That all...
Hello All CNC Fans.
Looking for advice and feedback.
Many of us are familiar with the famous HSD 9Kw ATC spindles used on many machines.
While they are of top popularity due to their...
No offense meant.. but I can't believe anyone is even using a wireless sensor for such a function.
I have a SYNTEC 6MB machine.. ATC... and a wired sensor.
Beware.. Chinease machine makers are...
Your Best and probably only hope is SENKE...
There is nothing standard about SYNTEC...
everything is custom.. almost open source.
At the least spindle stuff is not corrected properly.. or.....
As far as external feed hold... I am pretty sure I have seen Key-stroke mapping.. so a keyboard may be able to be plugged in..
Although it may need a ladder modification,etc...
Maybe attaching...
I own a BCAM CNC machine.. and I'm mostly satisfied.
It wasn't delivered perfect.. but not nearly as much trouble as Others here looking for help.
It also depends how much upgraded equipment you...
djcregan,
Thanks for posting your picture of your ATC setup Screen,
Sadly this proves one major flaw in SYNTEC... indirectly...
Every manufacturer sets up the same SYNTEC 6MB differently.....
When I had a problem with my Genuine HSD 9KW ATC spindle.. being sluggish and slow..
I found the factory wired it for 380V 3 phase and not 220V 3 phase..
I swapped the wiring around and it was...
I would recommend pictures to help everyone visualize your machine and what you are talking about.
Your machine Manufacturer should have configured the various outputs you needed... otherwise it's...
Hello Syntec Engineer...
So good to hear from you.
Thank you for the information you described.
I do plan to use a servo motor for Rotating the Tool Magazine... There will be 4 positions... ...
One more question? How do I write the values into the R-bits... I know I cannot do it from the "Diagnostic screen" .. I can only see them...
Do I record the Rbits somehow through Parameters?
What Kind of controller is this anyway? DSP?
Do you have pictures of the machine and various components?
Did you try to get help from OMNI?
Whad did they say?