Ok.. i admit.. i don't know anything about servo's.. but.. maybe... inverting the encoder signal in some way?..
Type: Posts; User: arie kabaalstra
Ok.. i admit.. i don't know anything about servo's.. but.. maybe... inverting the encoder signal in some way?..
erhm... in that case.. Flip the wiring of one of the servo's?
Yup.. www.miro.com
You can use the Free version which is already quite Complete..
as for the meeting, I have something to show..
at the moment the Code Editing part works, I can make my own...
Currently i'm Coding my ass off, i have a CNC Meeting early November, and i need something to show there..
Progress has been slow, since there has been other (Design) work as well, so i need to...
A programming App is what is missing with all PC Based Controllers, like EdingCNC and LinuxCNC, and with "programs that can merely make a CNC machine move" like Mach.
At least there is a...
The Best way to use a Toolsetter is Using it as an NC Contact,
I don't know if you are capable of writing or modifying your macro, but i've discovered that there is no Control on the "SwitchType"...
G20/G21?.. Machine setup in Inches instead of millimeters?..
https://www.cnczone.com/forums/attachment.php?attachmentid=495504&stc=1
This is what the Console for the Lathe looks like.
Also with a Heidenhain Keyboard, a TE 400 this time.
It is quite easy...
There's something going on at the moment..
Since i recently did an Upgrade to the Control of my Lathe, i swapped Windows XP for Windows 10, and wrote a new Macro for the EdingCNC control, I...
That is the reason i started Devellopment of E++. i wanted the Syntax Coloring and Indentation like i have in Notepad++, but without all the extra functions you don't need.. and some extra's for...
I wanted Colours as well, that is why i made E++.. I do need some "Time off" so i can Translate the manual to English, so i can put the link here..
but there are plenty of Editors providing...
what are you trying to prove here?..
With EdingCNC you can store probe points in parameters, and use these to calculate if probed points are on a curve, then you could calculate ahead to see if the next point is on that same curve..
...
that is only with PC Based "Hobby" CNC Controls.. I've looked at a few of these.. and immediately after.. i had the urge to rinse my eyes.. with THIS!
...
In my book.. Such discrepancies between offset and dimension, call for a more Rigid setup, or even hardturning..but that requires a way different machine..
...
if your setup isn't rigid.. don't bother hitting the green button i always say...
if your machine isn't rigid and repeatable, get a forklift, and throw the thing in a Dumpster..
I've been...
https://www.youtube.com/watch?v=5JnDloaC1YQ&t=135s
\
Hold my Beer.. :cheers:
in the past i've been working a lot on 3D probes.. i have now a new design, that should be easier to build and...
that all depends on the machine..I used 2 mm on the Bridgeport VMC 800, 1000, 600, 610, Interact, Oerlikon Vector, Schies & Froriep, Kiheung, Basically every Heidenhain Operated Machine i ever worked...
http://www.egerobotik.com/gallery_gen//b31caabf71db44d95b7a0b267e541b9c_960x590.jpg
Yes and No.. You can Actually make your own GUI, but you have to be able to write that in C++, basically writing...
The workflow..
Ok.. Here Goes..
when i need to turn something, i can either do it one cycle/operation at a time, or just program the lot in one go.
That programming is done in EdingCNC.
...
G00 Z-15
;CYCLE FILLET FACING
#1001=22.5 (X1)
#1003=-17.984 (Z1)
#1011=37 (X2)
#1013=-19.944 (Z2)
I've been busy lately...
i wrote a new Macro for EdingCNC, since the old one could use some improvements.
The old macro made "tiny programs" that were automatically loaded in EdingCNC on...
https://www.cnczone.com/forums/attachment.php?attachmentid=494682&stc=1
I did write my own Editor with Syntax Marking and Indentation, i could use NotePad++, but that has too many functions you...
There is a way to rewrite your M-Codes in EdingCNC, you could for instance put G28 into the M2 Routine to make the machine move to G28 at the end of a program.
Furthermore, as you can clearly see,...
SUB M33
IF [#24==-10000000000.000]
IF [#25==-10000000000.000]
#3701=[#5001]
#3702=[#5002]
#1280=[3]
GOSUB SET_PLANE
...
Folks, it has been a while, but recently i found something REALLY COOL in the manuals:
the parameters 1-26 represent the letters of the alphabet: A=#1, B=#2 and so on until Z=#26
This means...
The Concept 60 is a nice and small machine.. i would like to have one too..
But.. the Concept 60 is intended with educational purposes in mind.
Basically it is a Modernised EMCO Compact 5 CNC,...
The EMCOturn 120 Standard comes with either an EMCOtronic t1, or an EMCOtronic TM02 Control.
I am used to far more modern controls, like Heidenhain and Fagor, but!.. the TM02 is quite easy to...
I first Googled Omniturn GT75.. before i was going to say "EMCOturn 120" because that machine is way smaller.. I have one though, and i really like it..but it only has a 20 mm Main spindle bore.
I...
I heard that!... at the moment EdingCNC still works with the single input from an "encoder" which can be as simple as a limitswitch mounted facing a disc on the spindle with one hole in it..
I do...