your not using any comp. If you had a G41 that would activate cutter comp. Then if you cut was .005 undersized you could use comp in your tool data. -.0025 or -.005 depending how you have your...
Type: Posts; User: kkburr73
your not using any comp. If you had a G41 that would activate cutter comp. Then if you cut was .005 undersized you could use comp in your tool data. -.0025 or -.005 depending how you have your...
Need more info. Im not understanding what your profile is.
Hey Mastercam users. Today I used FBM machine in Mastercam for the first time.. It was fast, worked well and did the job I wanted it to do. But I felt limited, as far as lead in lead out goes.. Im...
Sorry. I guess I should have read the whole thing.. Idk then...
sounds like your spindle bearing. quick test. with your spindle at a free state. turn it by hand. if it spins freely. not a bearing.. if you spin it and it drags.. bad bearing... another way is turn...
you can purchase a 60 deg end mill that will do that in a full depth of cut.. process it the way you are to gut most of it out then use you 60 deg end mill and remove the steps side milling with a...
My opinion.. I would look into the haas vf2.. very user friendly and cheaper to fix if something does go wrong.. This opinion is based on you saying that your market will be mostly alum.. if you get...
Find out the recommended surface footage of that brand of tool you are using. take the surface footage x 3.82 / dia.. this gives you the recommended rpm.. take the rpm x ipt x # of flute.. thats...
Mastercam X7
Hi.. The way you did it is one way of doing it.. Either way you would of had to create line. Your containment has to be on the same plane. The way I do it. I take the solid. then I create wireframe...
Are you at the correct plane... I use mastercam, all I have to do is create a fillet and trim.
Is the chamfer mill you purchased long enough to do it in one shot?