Search:

We have a TrackerCNC 4 X 8 table and originally built a downdraft table. We got 10" ductwork from Menard's and a free squirrel cage / motor from an old home furnace at a local HVAC dealer.
...

As Massa spoke of early on.... we knew nothing of CNC machines and started by looking at the PlasmaCam and slowly worked up to the DynaCNC, which we almost purchased, until we found TrackerCNC in...

We use our for three different companies we two partners have. I cut out parts (10 ga. steel) for discharge chute blockers I make for commercial lawn mowers. We cut out parts for my partner's...

www.weldingsupply.com we get all of ours from them. Great service and fast. Norm

We've had ours up and running for about 5 months now. We're very satisfied with it and it serves us well. We started with a down draft exhaust until we found it too hard on the exhaust motors (we get...

We have two systems (one is a down draft on a 4 X 8 table and an over head hood on a 5 X 10). Both work well and we went the simple (read cheap) route with ours. Each has a motor and squirrel cage...

OK, we got our table about 10 days ago. Got it assembled and squared and tested. At one point, in the manual, you have to stop and call in. That is the time that Tracker guides you through routine...

Our 4 X 8 Tracker table was shipped Thursday and due here Tuesday. Can't wait as we have a lot to get done before the first weekend in October's exhibition in Louisville.

Thanks so much for the help, I'll try them. Now it's my turn... Google is really not that good of a search engine since it is a 'pay to play' engine where listing are in order of highest payer down....

I'm working with CorelDraw right now learning it before the machine arrives. I haven't read enough of what I need to know yet to be even functional with it, but I'm currently trying to take a scanned...

Well, thank you for the slam Torchhead. I actually don't have the time to review this website on a daily basis...too many irons in the fire. If you want to check on newsgroups and websites with the...

Well, we did our research and read several reviews and comments from others in newsgroups and ordered the TrackerCNC today. DynaCNC came close, but the Tracker actually came out better and their...

We were looking very seriously at the DynaCNC and then we got the info on the TrackerCNC which is very impressive for the same money. The Tracker CNC has a much more explicit DVD and we're more...