Search:

Does anyone happen to know what the default "data folder" is supposed to be, and what files it typically contains? I have been using the software primarily for model dimension extractions, and CAD...

Does anyone know a good source for specifications on American Buttress thread details? Specifically I need to figure out how to measure a 3.3125-12 Buttress-2A with thread wires. What little...

@ dcoupar:
I have had to alter 5130 on the other machines before... So I guess I am stuck on trying to find out what the "signal" (M-code) would be to trigger the chamfering... thanks for the input.

@fordav11:

The Puma also has the Fanuc 18 TC control.

According to the manual for the Hwacheon, M24="air jet and spindle inching" - M23 is not shown.

We do have a Mori SL-4 with Fanuc 6TB,...

I've got a 1998 Hi-Eco31A machine with a Fanuc 18TC control.

Does anyone know the M-codes for chamfering out of thread? The manual does not indicate any M-codes associated with this.

I have a...

Thanks for the advice. I'll toy around with it some and see what I can get resolved. I still don't understand why it works fine on our Daewoo w/Fanuc 18T though.

Part of the reason we program...

We recently purchased a Hwacheon HiEco31A with a Fanuc 18T control. I have been having some trouble getting it to operate in the same way as our Daewoo Puma 200 with the same control. I am using G50...

Does anyone know of a user-operated, forum type website that can offer some insight into using the "Manual Guide" application on this control. We just purchased a machine that has this control, and...

Neal,

Any suggestions on where to buy these? I have found some adapters online that use various flash cards. I've noticed that some are 16-bit, some are 32. Any difference for this purpose? Also,...

We just finished installation of a 2006 VMC4020 with a Fanuc 18iMB5 control. It is equipped with the card reader on the side of the display, and I would like to know if anyone has recently purchased...

sometimes letting the bar float will help reduce chatter... not a guaranteed fix, but if the bar is allowed to flex a very small amount it often helps us when this problem comes up.

Neal-

When the problem first surfaced several years ago, we replaced the pot, but got no change. Our Fadal rep. that was servicing them when this happened basically gave up, said maybe we could...

one thing we've found to work pretty well is that sometimes letting the front screw closest to the tip "float"... just have one screw holding the bar tightly at the back. of course, this assumes that...

Has anyone had problems with the spindle revving out of control when temperatures get hot? We've replaced the spindle pot, but it made no difference. The only way we can control it during summer is...