Search:

Here is a simplified G281 (same as a mill G81, but for radial drilling on Haas lathe).

%
O02410( G241 - RADIAL DRILLING)
G54
G00 G53 X0 Z-7.
T303
M19 P0
M133 P500
G98

%
O02430 ( G243 - RADIAL PECK
DRILLING )
G00 G58
G00 G53 Y0.
G00 G53 X0.
G00 G53 Z-7.
T505
M154
M133 P500

If it were the rotary axis on a mill, you could use a G107 to wrap the figure 8 around the rotary part.

For this kind of milling on a live-tooling Haas lathe, the code will need to be programmed...

Enjoy.211386

If you calibrate your probe on a certain hole, it should be it up (diameter and position) perfectly.

Some things to watch out for when calibrating:
- be sure to clear all Macro Variables at the...

This is a CAM system / Post issue.

The IJ values in your G03 (G03 X5.204 Y1.605 I0.0115 J0.2422) designate an very exact center for your G03 Arc.

I drew up your coordinates in CAD, and like...

Check out the attached G143.pdf. It gives an example of the G143 cycle, and how I'd expect things to move, when using it.

If you still have questions, give your dealer a call, or email the Haas...

You can use a G112 cycle, with G41 or G42 compensation. See your manual.

You will put a radius wear value into the same spot on the Tool Offset page that you would put in your Tool Nose Radius...

Seriously. Turret Piston Clamp Assembly.

You can get two mag-bases with indicators and mount them to the tailstock slides.

Set one indicator to read off a spot on the Turret (next to a tool...

Turret Piston Clamp Assembly. Call your dealer.

Setting 113 TOOL CHANGER METHOD. Change from "AUTO", which is your TT4 4-station tool turret, to "TL POST".

TL POST = When a tool change is commanded, the machine will stop and the control will...

gandp -

What version Software is your lathe running? You can find this by pressing PARAM DGNOS, going to the Diagnostics Configurations page.

It will be a number like L11.14A.