Believe 96 was the transitional year for the vector drive.
Mike does your 96 have the Brushless Servos sticker on the front?
Type: Posts; User: dresnerm
Believe 96 was the transitional year for the vector drive.
Mike does your 96 have the Brushless Servos sticker on the front?
Geoff, there should be a build sheet taped to the inside cabinet door. It will tell you how the machine was configured.
You can get into debug and see how many hours have been recorded however...
Hey Mike,
The behavor by itself does sound like it could be the serial interface board and/or it's internal cable (not your external since you swapped it from a working machine). The only...
^ this above ... one that's been confirmed ....I'd recommend stepping down to 9600 baud, just to get a connection. If you can get the machines communicating, you can then try to speed things up...
I'll post pics of a spare video PCB I have .. When mounted the floppy connection will be in the top left ... there's a ribbon connector and a power connector ...
If you have a cables hooked, see...
Is your floppy drive in the panel up front (pendant mount) or in the rear of the machine? Either way, the emulators you can buy replace the floppy drive itself. You unplug the floppy and plug in...
Thx Machineit! Thought about just pressing the ends together a little bit.
I wound up just turning a small aluminum sleeve/reducer and pressed it in the open end and drilled a hole thru. Seems to...
Hey guys,
I have a 98 VFO with the programmable coolant unit. It's one of the black units.
Few months ago the orange nozzle blew off.
I still have the brass bar but it looks like the shoulder...
She's back up!!!! Looks like it was the LPS. Few bucks and it's back running. I got in touch with the company I got it from and they had a set of parms that worked for me too! All in all good day!...
Thanks again Phil.
I think it may be the power. I let it run a few hrs today. Sporadically checked the LPS. The temp on the DIAG screen made it up to 94F and at during one check the 12 V was...
Still struggling as time permits. I've been booting it and letting it engergize and been watching the screens. Last week I had it running a few days and the 'e's started back .. just an occasional 1...
Thanks Phil... unfortunately I do not have anything original. Will sure bet to dump a copy and put them back there when I get things running again.
I believe my VF0's memory got corrupted a few weeks ago. I had a few garbage characters popping up on the screen. I initially thought it was something with my keyboard and/or keyboard/video PCB.
...