I have problem with Mazak Integrex 200SY Mazatrol Fusion 640MT system.
Every morning there is alarm 26 Illegal parameter (1, 36, &0037)
And behind in electric compartment I see top PLC showing...
Type: Posts; User: quasarix
I have problem with Mazak Integrex 200SY Mazatrol Fusion 640MT system.
Every morning there is alarm 26 Illegal parameter (1, 36, &0037)
And behind in electric compartment I see top PLC showing...
Greetings!
Can someone please provide me with a sample G code for Mazak Integrex 200SY 1999-11
Thank you.
Greetings!
Does anyone have G code example or some working program ? ( I need to send it to Mastercam)
Machine is Mazak Integrex 200SY from around 2000, machine has sub spindle and Y axe, It...
Greeting friends!
I would appriciate if someone could send me manuals for
Hyundai hit 20m sinumeric 840d machine.
Regards
Greetings!
Thank you for your reply dcoupar!
Riggid tapping worked before, but i had some malufunction and battery was removed so i had to resend factory parameters and now rigid tapping no...
Greetings!
I seems i cant find parameter to fix my extremly slow down of feed rate during inner circle movments (G41 G42 G3), usualy its reduced 20% or something like that but on one machine its...
Greetings!
I would like to buy post for milling and turning for mastercam X4+
Please send offers to my email at [email protected]
Thanks guys!
it works when i type M98 P0100100(100 being sub program number)
but it repeats it 10 times, dunno why need to add 0, maybe 0 is separator.
BTW. on all other machines i have here...
Greetings!
I have a small problem with machine that has Fanuc 0M control.
Example code:
M98 P100 L10 (Call subprogram O100 and Loop it 10 times)
The problem is that it wont loop 10 times,...
Greetings!
My friend has an old MAHO 900 Milling machine and it has weird communication port, so it would been cool if someone have schematics how to rewire that port to RS 232 if its possible.
...
hey can you send me that post for mastercam please?
im just curious, I use normal fanuc post for it with some changed options and it works great..
i found solution, dont have time to explain if anyone needs it, contact me :D
Im trying to modify a post to output all coordinates without dots ie:
metric: normal output G2 X23.246
I need to output G2 X2324 or G2 X2325 but doesnt matter much if its rounded or not :D
...
Thanks guys!
i owe you :D
hope I make it work :D
It displays shortly 994 27 and in next line 0000
Hope that helps :D
ok will check and post here as soon as i can :D
Thanks for trouble
Greetings!
My friend has old old machine EMCO CNC-330 lathe/turn that has Siemens or my guess Fanuc system 6 control (with Siemens servos).
Machine works good, but it has no regular display, only...
Greetings!
My friend has old old machine EMCO CNC-330 lathe/turn that has Siemens or my guess Fanuc system 6 control (with Siemens servos).
Machine works good, but it has no regular display, only...
Does anyone have any heidenhein post processors for Mastercam?
I would need for 151 control but any would be appriciated
I have old 355 post processor but dunno how to update it for new...
Fixed!
Thanks samu
other problems that i found D455 also set to 19 (20 tools)
and set timers etc...
Greetings!
Machine got everything deleted using reset delete while powering on (or similar)
I restored original parameters but now i get alarm 1008 D450 SET ERR.
Would be nice if someone could...
its a YANG 600 1998 build
i got 1008 alarm after i restored parameters and i cant input timer deleys etc in diagnostic and that is giving alarm and stops working
ok i found manual at http://jpkc.scitc.com.cn/jpkc/2009/ljsk/05JXNR/jfzy/czxt/tswx/fanuc_0MD参数手册.pdf if anyone needs (its in english dont be scared of chinese :D
now if i only would know how to...
that alarm 1008 pops up after machine is turn on
like i said parameters were deleted and this is how far i gone in restoring.
machine starts ok i can even move axes etc until like 5 sec after...
its on Fanuc 0-MD.
Machine had parameters deleted, after i restored parameters as best as i could i get this alarm.
I was trying to input some D499-520.. for tool magazine setup but cant enter...
Thanks but i cant download it from url you gave me :(
so i still need manual :(
Greetings!
can someone please send me a Fanuc 0-MD manua in englishl for parameters?
i need it urgently plz !
email: [email protected]
Fanuc 18M
When milling contour at 30-48% load i get alarm
424 Servo alarm: Y axis detect error (or X)
is there any way i can raise some limit or something to avoid alarm?
does this have to...
Greetings!
I have a "small" problem with Bemeco Matsuura MC-710V
The electrician exchanged regulator or whatever and when i turn machine on i get alarms 607, 608 PC
and buncha 210 to 231 OT +/-...
lol you was a bit too late :D but thanks :D
i found it under Offeset>OPR :D
thanks all