Hi Nick
measure the distance from the machine bed opening to the top of the moveable bed in all 4 corners, are they all within 1/2mm, if they are more than a few mm out the bed could have twisted....
Type: Posts; User: waynerees
Hi Nick
measure the distance from the machine bed opening to the top of the moveable bed in all 4 corners, are they all within 1/2mm, if they are more than a few mm out the bed could have twisted....
Hi Klaus, the mini 60 has now been replaced by the Nova21, but it is still ok to buy one as there is still support and spares.( only been discontinued recently) What country are you in, do you have a...
334110To cut Silver cleanly you need 250+W, Yes it can be done by multi passes on a 20W, but the results are poor, even a 50W takes a lot of adjustments and multiple passes. Using a 120w IPG fiber...
Hi there
Can you confirm what model version the controller is ,and what led lights are solid / blinking, I could not make out much from the posted videos,
The Mini60 from Thunderlaser.co.uk is far better than the laserscript machines, I have both, the Mini 60 is much higher quality, servo not stepper motor, uses EFR tubes ( most of Reci R&D dept left...
Thunderlasers impressive range of quality Lasers are now available with full support in the UK. Daisymoon Designs Ltd the UK's leading craft laser cutters are now selling Thunderlaser machines, Full...
My pc just died in the middle of a new job, I just tried to reload NC studio to find the disk is corrupted, does anyone know if there is a download for this software anywhere
Thanks