Search:

please contact [email protected]

You can use custom macro B external output command function where u can transfer the variable data through RS232

it seems servo drive has a problem

9111.3 for tape editing expansion

use parameter no 6531
calculation is 360 degree is represented by value 4096
if you want to shift by say 180 degree you enter 2048 in this parameter
if you want to shift by say 45 degree you...

Your ram is corrupted
if you have complete backup of parameters, SRAM data, Programs etc.
Pres Reset+delete and switch on to clear all data and reload again

if you know the output for hyd pressure on please check in the ladder which timer is associated with it and increase the value of the timer

try these settings
9600, stop bits 2 , data bits 8, parity none
you can use windows hyperterminal software also( which is a standard software with windows for communication) . Use direct to Com...

reload the basic software once again and check

if you still not got it mail me at [email protected]. i will send you

Model 30 motor you will not be able to integrate with non FANUC control so go for a new motor

are you getting other modes like jog etc.
have you reference the machine again

1. Check your machine emergency is released . Than only system will come out of reset mode
2. Check if rst or esp is still blinking on screen
3. if all these are ok than your output for contactor...

Please get your drives checked. This alarm happens if yout drive modules become weak
which drive you are using and what is the alarm on drive
harsh