I cannot help you with the new motor profile. But, have you tried to select PC Set Up from the Communications menu in ULTRA Master.? Maybe whoever had the drive before had it set to 19200 instead of...
Type: Posts; User: LantonioA
I cannot help you with the new motor profile. But, have you tried to select PC Set Up from the Communications menu in ULTRA Master.? Maybe whoever had the drive before had it set to 19200 instead of...
I agree 100% with KCT and CarbideBob. I CNCed a Hurco SM1 Milling Machine:
X-Axis = Allen Bradley Y-2012-2 (0.51 KW, 4500 RPM, 1.4 Nm), Neugart 25:1 Gear Reducer, 25mm diameter by 25mm lead Bosch...
Al_The_Man, I haven't posted in years, and I just came across this thread, and I am sorry that it took so long for me to thank you! I did replace that IC long time ago and it worked! Thank you so...
Sure! Please send me a copy!
By what I've seen on the board, one track goes to the pin 63 and another one goes to the GL-1800. I couldn't tell if there are any other connections...
Thank you!
I downloaded their PDF! Is it a direct replacement for the ...C7LF...? How did you figured that?! The card works without it! If it has no other function, I will just leave it like it is!
Could you...
Hi everyone!
I mistakenly applied 10.7V to the pin 63 (Reset) instead of sinking it to 0 (zero) volt, for a split second. Now the red LED is ON all the time and I can no longer communicate with...
Gostaria de receber informacoes sobre como conectar o Servo Motor Bosch SG-Y1.016.060-03.010. Em anexo esta uma foto da placa (Name Plate) do motor.
Antecipo agradecimentos,
Luiz
I Just bought this 950 watts Bosch Servo Motor SG-Y1.016.060-03.010 and spent hours on the net trying to find its manual, datasheet or pin-out connection, but I found nothing.
Does anyone have or...
Yes gear21, I want to get the motor maximum rated speed, because I will use at least a 10:1 ball reducer for the axes. I already had set the kernel to 35KHz.
I forgot to mention that whenever I...
I connected an Old PC 1.2GHz running Mach3 to a Breakout Board (Attached), then the board to an Allen Bradley Ultra-100 (1398-DDM-005) Servo Drive, that is connected to an Allen Bradley Y-1002-1...
I will try to remove a encoder from one of a few broken Allen Bradley motors (N-2304 series) and install it on the Sanyo P5 if I get brave enough and to buy it... Or maybe it will work as it is!
...
Thanks a lot Matt!
The Sanyo P5 1000W P50B08100VCL69 (see attached) that I want to buy is really strange, it only has 3 or 4 wire on the encoder plug, and the encoder (or a resolver?) is a bulge...
Hi everyone!
I am just learning about motion... Does anyone knows if I can connect the Sanyo P5 1000w to the Allen Bradley Ultra 100 (1398-DDM-009) Drive?
AC Input: 100-240 Single Phase -...