I'm trying to get into my CHNC2 to at least slow down some air bleeds. It wasn't too bad for a while after reviving it from someone's farm parking area but it recently started really blowing and...
Type: Posts; User: Doggitter
I'm trying to get into my CHNC2 to at least slow down some air bleeds. It wasn't too bad for a while after reviving it from someone's farm parking area but it recently started really blowing and...
I'm getting this EX50 alarm on the CHNC2 Fanuc10 control. Does anyone have some insight to what conditions cause it, and even what are they calling the lube pump? Is it the Bijur style lube system? ...
On LB25ii with OSP7000L control, I have the low battery 4035 alarm on, replaced the batteries during power on, intermittent failure to boot up, and have hand labeled floppy discs. Something I read...
Nevermind
Do you have the manuals for what he's trying to figure out? I'm up against the same problem and have the manuals too. They aren't very clear on what's going on, and when you're coming from Fanuc on 5...
Got it figured out.
Special purpose type thing, 2.75" dia change in 6" of run. Is that an I value of 1.604" starting 1/2" before the part? Can the control even handle that big of an I value?...
There are 2 live tooling drives, no issues with X control, Z made humming noise while in home position but drives great. It will be outside under a tarp for a short time starting about a week from...
The cable is good, and has been working for years on Okuma MC4VA with OSP5000G control, and Wasino LJ63M with Fanuc 10T control.
Can you tell me if the 1998 LB25ii on the way to me will use the same RS232 settings as the MC4VA I currently run? The MC4VA and Fanuc 10T use the same settings in the dnc software now. I'm worried...
Does the turret need to be cycled/home'd in order for the machine to be in a ready state and use full rapids? I have a dead turret and I'm wondering if I can set up tools on the current station and...
Hi Machineit, do you have more of the diagrams for the CHNC2? Does it go more in depth inside the encoder itself by chance?
Are you still on this forum, Hernandez? I'm working on my chnc2 also, but my turret encoder is fried and I'm looking for info from an original part.
Hi N4NV, I'm looking for some info(almost any would be a help at this point) for fixing my CHNC2 turret encoder, could you ping me please?
Hi Nate. Did you ever end up with any info for your issues? I have a bad CHNC2 encoder that I'm trying to solve too.
Hi, Kirk. Are you still around on this forum? I'm looking for info that might help in fixing my CHNC2 turret encoder.
Can I bring this back from the archives? I'm looking for the turret encoder for a CHNC II. If ant of you guys have a parts machine that could sell that, let me know? Or, if I could get close up...
Hardinge part number CN0011798 or, it has C2-137 printed on the switch, 6 leads, encased in an epoxy type rectangle.
Anyone have an extra? Last owner let the smoke out in nuclear fashion it seems.
Looking for the turret position switch/encoder for a CHNC II under the cover on the cross slide. Mine is encased in a resin body with 6 wires.
That's me.
Here's the photo album link. https://photos.app.goo.gl/CYYoCPwVfpioBqUN8
So do the various boards from dynomotion compare to the boards from Centroid. I can't tell what's what when the...
Or anyone that knows it well enough to know what needs to be swapped out? Looking at options since my control ghosted a while back.
I have setup and error questions, and I would bet will need parameters.
EMG on the screen at startup with no control of any movements, can't find any error codes.
Are you available for help still? I'm having a alarm 227 happening. Mc500V Yasnac 3000G
Nothing?
Do you have a good video explaining how to use both?
Know why when I import a drawing with 0,0 in the center of a round part it doesn't end up in the center of the drawing, and it looks like the...
The operators manual is available for download from the Yaskawa website.
I never got it.
Emailing now.
Thanks for your help on this.