yes ,I did but the problem still exist
Type: Posts; User: david_chen
yes ,I did but the problem still exist
Hi all,
I have a problem with the servo X axis of 16Mi : it vibrate at the stop and I can't fix it by changing the servo parameters: .I read in the manual that if I have the servo tuning ...
Reactorshop,
I have the same problem with my Robocut alpha 0B.Can you send me the pameters of 0B machine ?
Thank you in advance
David
Thanks memoryman
David
Can you share the procrdure for iA controls?
David
Can anyone help me ?
David
Hi memoryman,
Did you found the procedure to change options on the iB ?
I have three password but I don't know how and when to input them
I am waiting for your reply
David
Hi everybody,
My FROM card of 18MA was fault.I bought a new card and replaced it.The control can't work,it need the system files but ...I don't have them.
My friend had a similar machine and let me...
Does anyone have the Fanuc servo tuning software A06B-9001-J900 ?
I need it to tune my F15MA
or can tell me how to get it
Thanks verymuch
David
It sound good,please tell me how to set the jumper and the comunication protocol
Thanks
David
Hi All,
I am new to Meldas.I need your help to fix the HDD problem of 635M as follows
I have OKK VM4II with Mesdas 635M,
2 weeks ago the HDD create noise when access and yesterday morning,when I...
Hi Monster_Shop,
I have a PCV50 with Meldas 320M, the battery died so I need reinitialize the EEPROM
Can you forward the intructions from Mitsubishi to me to reinitialize the control?
Your help...
Hi mazak-user
My Email :[email protected]
Hoping you help me solve the problem
Thanks
David
Hi mazak-user,
My PCV50 had the problem exactly like the problem of hermanbajwa:
I did not power on the PCV50 for about 3 months ago and when I turn it on today,the CRT displays like the pictures...
Dear All,
I have a milling OKK MHA800 use FANUC 15M,Last week the lubricating pump which use to lub the slide ways is not working.I bought one lubricating pump, maker :LUBE Coporation ,model...
Hello All,
I bought the 2MB Sram PCMCIA card from Ebay.The card works OK when I save the progams ,parameters,pitch error... from my Fanuc 18M but I can't see them on my laptop.
When I insert the...
Hi memoryman
From IPL screen
I input 99 then
input 1st 8 digits 23678625
input 2nd 8 digits 37264699
input 3rd 8 digits 19261161
but there are no question to clear files appear or axes ?I...
Thank you memoryman
David
Thanks for your reply,memoryman
The software series 907 version 10.
One more question :If the 5D is the checksum ,can we use it to locate the error address?where is the position of the checksum in...
Hi all,
My milling machine with Fanuc 6M has an error displays on CRT when I power on:
SYSTEM ERROR 998
101 5D
and the control hangs ...
Refers to the Fanuc...
Hi,
I have a PG mate but don't have the FAPT disc so it can't operate .Does any one have the FAPT flopy disc helping me please
Thanks
David
[email protected]
Can you send me one copy J502? I urgent need it too
Thanks in advance
David
Hi All,
I just bought a used milling machine with Fanuc OMA (digital servo),every thing appears good working except the ATC but I cannot fix the problem... because the ladder diagram cannot display...
It's Fanuc 15MA model F but ...I don't know the procedure to try the passwords
I have a MATSUURA machining center with Fanuc 15M, since the battery is flat so the alarm RAM PARITY ERROR appear when I power on.I tried to do a memory all clear as with Fanuc 10M as originally...
Thank you very much for all helps,thank you fordav11 .Thank your helps, now I can run the machine in manual mode but the machine cannot run in memory mode because there are PMC alarm: 241 Empty pot...
Does anyone have option parameters of Mori Seiki MV Junior/Fanuc 10M.
Please send me a copy.Thanks in advance
David
Email :[email protected]
Thank you fordav11 for your help.I did all steps as you told but when I exit IPL, an alarm display :
PC alarm
PC040 PC error
PC500 watchdog
and I can't input any thing more...nor open other...
Hi All,
My machining center Mori Seiki Junior with Fanuc 10MA display an alarm:"RAM PARITY ERROR" when power up because the memory back up battery is flat .I need clear all memory but I don't know...
The master print PCB of OM-A is A16B-1010-0150