I originally purchased the first model that got released ,... Wouldn't keep constant load on the tool ,... So after speaking to Zhang a few years later and seeing some real time cutting videos , I...
Type: Posts; User: Dr.Nos
I originally purchased the first model that got released ,... Wouldn't keep constant load on the tool ,... So after speaking to Zhang a few years later and seeing some real time cutting videos , I...
If you have a lemon like me this will impress ..Love the 2 year warranty banner
CNC DIY High Torque 2200W 6000RPM Milling Machine BLDC Motor, View milling Machine BLDC Motor, Hishine Product...
Has any one had any luck , or even bothered with the Sungmutan Da Vinci code
"◆Should provide 485 interface and TTL interface, which can be conveniently and communication"
At first i was using a trim pot on the input side of the voltage , Scaling it down to 11v ,..Using a trim pot at the 0-10 v wasn't very successful tuning min max rpms.. .. In the end didn't use them...
All Im trying to show is the improvement Using Pwm control Vs the Step Dir control , on the previous videos earlier in this Topic .
Stopping at corners ....My bad i had the box ticked 275334
Can't...
Thought i would update my results , Trying to eliminate the spindle drop in Rpm under load , Ive changed from the C6 spindle Step / Dir 0-10v control card , To a Digispeed 05 Pwm > 0-10v control...
Cutter and a vice Jaw :eek:,.. Got a draw full of those ,... Windows Movie Maker , pretty straight forward to use , edit add tittle pages ,banners ,intros and its a Windows live add on , Posting...
That makes more sense ,...Perhaps my spindle rotation is not the only thing backwards this weekend ,.. (flame2)
I also finally managed to complete Rpm Dro using index in MachStdMill , Using the Smoothstepper board wired direct to 2200w driver board , ... Which had its moments, ....I couldn't get an updated...
I think this is your answer , read through this Calypso CNC User Forums ? View topic - RPM not shown
Hi Chris , when i did my testing i couldn't get any read out on the RPM Dro in MachStdMill , my read out was only displaying on the factory lcd that comes with the driver , have you tried changing...
The pic pretty much explains it all , interesting though , first time i connected the ground on the C11 plug to smoothstepper pin 25 Fout pin 13 , I to use Machstd mill and in the hardware screen i...
Good stuff....
I had ago at running the 2200w spindle with Mach3 using the Usb Smoothstepper , At first i wired f/r and s/p grounded together , and used the Pwm signal ( from smoothstepper wired to...
I was going to use a treadmill motor t start with ,already had the motor and a controller , but later discovered they only have a duty cycle of 20 mins!!
the Adlee servo motor would be something...
I would agree with you , I emailed Zhang yesterday venting my unhappiness of his product , despite being a year old , i had emailed him and sent him videos ,( Unfortunately New Zealand being almost...
I read this as "WELL?, (Drumm roll) Want to see what a 3hp can do? " ( im thinking this must be some videos hes very proud of , !! roll tape )
...Back to the man cave ....
Any chance you recall what Version is marked on your driver board ? mine has Ver A1.0 and a serial 18022012 which more than likely is the date 18th feb 2012 ( how we write it on this side of the...
We wait with great anticipation .................................:violin:
Will do , thanks for your help ..will update with results .
I think so , not to much to adjust really Pulse is set at 2.8 best i could get when tuning with trim pot than gave me the closest when changing rpm 6000 -3000 then 1000 rpm drops .. fraction out at...
i sure am Smoothstepper Usb V1.2
That is interesting ,.. So theres a V3 ? .. About as bad as software companies ..( Not testing their products before dumping them into the market ):mad:
Ive tried many motor tuning settings...
Purchase date of new driver 19 Nov 2013, so basically a year old , I did only update the driver only , Motor is still original , Im unsure if there's an update there ? that I maybe missing? ...
Hi Chris , i hear what you are saying , about tuning lead in and lead out , ( I ve not longed changed to Hsm myself ) Kind of putting a band aid on the problem in my opinion, ( the peck drilling...
Too much power ?? no such thing ,I upgraded from a 1/2hp x 2500 Rpm dc spindle motor , that i had to be very selective with my cuts as if the motor dropped to much rpm it would trigger E stop , and...
Thats aluminum , I tried finding a video of the original controller , but nothing worth posting ,Version 2.0 is defiantly an improvement ,the tach reads if turn the spindle by hand ,( V1 was very...
Glad to see this thread is alive with positive results ,( This thread had just started just after my 2200w Spindle package arrived, and hoped the bigger motor didn't carry the same troubles , ..and...
Nothing worse than reading through posts and not having answers to what fixed the problem..
Conclusion...
After a replacement board arrived and installed i still had the same Estop problem once...
Hi John / Xerxes
Nothing on the Wiki help made any difference , apart from inverting the disable function as a last resort , but that wasn't really fixing the problem , Sorry John as of last...
Progress Report ....
I am yet to solve the the problem of all 3 of my Vsde servo drives in " Disabled state " . I have Narrowed it down to a fault in the E stop function on the VSDEPI board , With a...