Search:

I'll measure tomorrow for you.

Thank you sir! Just what I was looking for.


Sent from my iPhone using Tapatalk

Hope this isn't in the wrong spot...a year or so ago I was researching vacuum hold downs for a 4'x8' Cnc. There was a company that made a vacuum machine for the somewhat diy'er. Black box I believe...

I shut my machine off which is run with a smoothstepper after drilling some holes in a large workpiece that I still have things to cut in. When I shut my controllers and smoothstepper off the only...

Troyer...did you try brandsoftheworld.com


Sent from my iPhone using Tapatalk

Your correct it's the Cncrouter parts spindle. I built the shoe myself.


Sent from my iPhone using Tapatalk

Oneida mini gorilla. Very happy with it!


Sent from my iPhone using Tapatalk

282090282092282094

All up and rolling!


Sent from my iPhone using Tapatalk

Hats off to the folks at cncrouterparts. Been helpful answering questions and good customer service. Lots of parts with this machine and I wasn't missing any!


Sent from my iPhone using Tapatalk

281958281960281962281964281966281968

Table built from 11 gauge square tube painted with hammerite dark blue paint brushes on. Happy with all the results. If I had to do over again I would...

I'm actually using it to toggle dust collection on and off.


Sent from my iPhone using Tapatalk

I've got pre assembled electronics from cnc router parts. There are two relays for various features you may want to add. Relay one I can turn on and off in mach 3 using the flood button. I want...

I just got my cnc router parts 4896 up and going. (I'll be posting some pics soon) I notice when jogging the machine over where the flat gears meet in the middle on the sides the x motor moves a...

Those legs look awesome. That new cnc should make quick work of some line arrays. Haha. How long did it take you to get your machine from when you ordered?


Sent from my iPhone using Tapatalk

When you constructed your metal table what did you do to help keep things square and flat? I don't have a perfectly flat 49x112 area (not sure anyone does) my only thought was try to create one with...

I planned to use the CNC to drill wanted to use mdf for for base board simply because I have no local supplier for Baltic birch but I'll probably see about sourcing some for this project. It should...

Are you guys using like a 5/16"-18 ez lock insert? Do you epoxy them when you install them? I've used them on other things I'd just be a little concerned about being able to get the clamps tight...

Is that a hammerite finish on your base?


Sent from my iPhone using Tapatalk

Great looking table. Looks like a display for a base for a tank! Thanks for the tips. How did you anchor the machine to the base? I've looked at extrusion brackets but they are all described as...

I'm eagerly awaiting the remainder of my parts to show for my recently purchased pro 4896 machine but in the meantime I've decided to build my own table and make it mobile. My plan was to use 11...

I had just assumed because my old machine is limited to about 40ipm that the new machine will create more dust/chips because it will cut faster. The old machine with the cyclone/shop vac set up did...

I'm moving from a sosylva 25x37 table to a crp4896 with nema 34's. I currently use a shop vac with an onieda cyclone with a 2.5" port. I'd like to use my cyclone with a wall hanging 1hp dust...

I was running an ancient machine with windows 2000 upgraded my version of Mach3 and started to miss steps. I've tried everything so I have a new machine that I've loaded mach3 onto but for the life...

What kind of psi do you run?

Ahh...good thought. That hadn't crossed my mind. Thanks!

I've got a small diy machine I've been using to cut some aluminum. It works pretty well I rigged up a hose to blow compressed air and keeps the chips out of the way but I constantly stand there...

Thanks! Appreciate all the great info!

Thanks! That solved it.

I'm running mach 3 with a diy machine and vcarve pro. Anything I draw in vcarve is cut as if I were to take the cut preview and lay it face down on the machine instead of face up. So any lettering...

Wondering if anyone had an F150 logo they'd be willing to share. Still new with my cad software and would take me a little while to draw and kinda on a tight deadline with this project.