Fanuc 6Mb control
Thanks
Type: Posts; User: SteveY
Fanuc 6Mb control
Thanks
Hi,
I finally got some fuses and got my Mori MV 35 back in operation.
Power up and everything is fine and working.
I accidentally over traveled Y axis with the wheel. The screen changes...
I thought we won WWII. They got even with us.
I tried ti download thru the RS 232 port and couldn't get it to work. I had the manual and set all the parameters accordingly., would not work....
Hey,
Tried using "P" and it worked. Thanks for the tip.
SteveY
Hi,
What is the correct procedure to set the tool offsets?
I can set the tool offset in G54, but not in the tool registry.
Everything seems to be locked.
Can someone help?
Hi,
Does anyone know the correct hookup for the 3 phase power to the terminals inside the cabinet? One fuse has blown twice in 3 days. I need to know which terminal the 240V leg of the 3 phase...
Tried to download the NC lite free program, will not work, any ideas?
Thanks,
SteveY
Hi
My machine won't power up today. The other day the Hydraulic pump kicked off and I could hear the relay or circuit breaker kick. I turned power off and back on, it worked fine. Today, the...
Hi,
Where can I find a software program for a desktop 25-9 pin to connect and set up the handshake and transfer CNC files?
Thanks
I made a drawing. The finished view has a set of gray lines off to the side with a dimension that I used earlier. I can't delete it. it saus;
RDI annotation?
Can someone help?
Thanks
Thanks everyone. I did it both ways just to see,
I'm running Solidworks 2010.
Each end of the arc is my end point.
I know 3/16 = .187, so I could just follow the arc, but I'd like to learn to draw it correctly so the part looks precise.
Hi!
I've drawn a line arc with a radius of 1.06 and 120 degrees in length. I want to use the line as the midpoint of a 3/16" slot.
How do I turn the line into a slot?
Thanks
Hi,
Where's the best place to buy retention knobs for MV 35 toolholders? BT 35
Thanks
I went into Properties - Generic Mill and choose stock setup, the top box says stock view. I changed it to "back" and it seemed to work. I ran a toolpath and it displayed and worked correctly.
...
Hi,
Under view drop-down, standard view the surface I want to machine is the back view. I want to make the back view the top view. Can this be done in xform rotate?
Thanks
Hi,
Designed a part in Solidworks 2010. Saved as parasolid. Imported into MCam X4.
Problem is the top view in Solidworks became the back view in MCamX. trying to set toolpaths, etc doesn't...
What is the best books or tutorials to learn Mastercam X?
Thanks for any help!
Sorry I missed the meeting, was actually working on my machine.
Anyone using MasterCaM X?
When is the next meeting?
Thanks
What day is the meeting?
Steve
Hi!
Thanks for reply. Actually I live in Corsicana. I have a Mori MV 35/ Fanuc 6M control that I'd like to get up and running.
Problem #1 I can't get programs to load thru RS 232 port. I...
Hi,
Any 6M Manuals?
Thanks
Hi!
How is the user group coming?
I need a little help with my CNC.
Any CNC users on here that can help?
Thanks,
Thanks for the replies.
I can't send a program from my laptop to the CNC via the 232 port. The CNC keeps scrambling the code. Manual input and operation is fine. I've tried different baud rates,...
Hi,
I can type programs manually, etc. I cannot get my RS232 port to recognize input from my laptop. Does anyone have the parameters so I can double check mine. I think the original owner locked...
Haven't plugged a PC into the machine, just using the machine's monitor.
Alarm screen reads;
220 - +Y OT
221 - -Y OT
The table and ram travel in X & Z fine. The table won't come out of the Y+ OT position. Tried to JOG with Y-, NOPE, reset does nothing, manual...
Just sat up this machine. The rookies decided to play with it while I was gone.
It looks like they manually ran it past the travel limit in the Y- direction, then proceeded to over travel in the...