Search:

Have the manual scanned but it's to large to upload through cnczone PM me and we can see about getting you a copy of the file.

I do I will post the parts manual when I have finished scanning it in.

Here is a scan of my manual, I have the parts, and both programming manuals if you want them as well.337454

I'm not understanding the exact trouble you're having, but it sounds like from what you are saying that you either have a problem in your O9001 program (this is called by M06) or parameter 0737,...

So I finally broke down and contacted Martin CNC and talked to Shane. He told me how to calibrate my z-axis servo control board to fix the z-axis. The z-axis did need to be calibrated, but it hasn't...

The button problem is typical. You just need to clean the contacts (button and board inputs), but I don't blame you for just starting a conversion. It's probably easier in the long run. Though I will...

I didn't know the boards were that much. He offered me an upgrade for less than that I thought, but it may have been less boards than you would need.
The belt would probably work if it will fit in...

Sounds like you're coming along on the machine. One thing you might consider instead of going with mesa is a Martin CNC control upgrade. He has his own Hurco upgrade system it replaces the main board...

So I checked the 5V supply my meter reads the voltages at 4.9-4.6, and they seem to be rock steady. The voltage at the rpm sensor is 4.8V and doesn't fluctuate. So as far as I can tell this...

I will definitely check that as soon as I can. I haven't seen any voltage issues, but I haven't been looking for any. I don't have any wiring, maintenance, or troubleshooting information for this...

My Hurco (It's a 1983) can do very little in the z axis and it could not do a helix action in milling. I didn't know if that was an option on the later machines and if so when they implemented it.

One thing I forgot to mention is you want the manuals with the machine (they tell how to program, operate, and maintain the machine). They are very hard to find online and are worth their weight in...

That wouldn't be a bad price especially if you can get a little tooling with it.

So the machine is worse than I was hoping. Not sure what is wrong, but it's seems fairly serious. The RPM sensor was acting up again, and I think I know, which connector it is now. The Z axis is...

For rigid tapping and thread milling this really isn't the machine I would recommend. It probably can tap, but it would be best to use a tension compression holder to do the tapping (you would need...

So I was able to spend some time on the machine last week. The spindle speed RPM problem was causing issues, and nothing I tried would get it to go away until I cleaned one of the control board...

1. how old? Fixing the old machines can cost an arm and a leg.
2. what kind of experience do you have with CNC available to you at the shop
3. what are you wanting to make on the machine some are...

So I just found out that the QPM nozzles I was looking at in the MSC link are sold 5 to a pack since I was going to need 2 paying $40-60 depending on sales was to much, but paying that much for 5...

So I'm thinking about getting back to working on the Hurco after a long hiatus. I found an amazing deal on a Bridgeport VMC about a year ago, and had the money so it's been distracting me. Now that I...

I hate the unfinished post on the forums so I decided to come back and finish this post. I have the machine working and have completed my second small job on it. Both tool changers work, and I'm...

So I almost have the machine working. I have successfully referenced all 3 axis, and I have the left tool changer working. The right tool changer was broken when I bought the machine and was supposed...

The Fanuc Bridgeport 412 and 316 are kind of rare. The Heidenhain controls were much more popular as far as I can tell (BPT told me my machine was rare and I have seen other post talking about the...

The original owner should have received the parameters and a setup sheet with the machine, but if you can't find them (original owner or the sheet). Check with this guy Bridgeport, Machine, Service,...

I have movement on all 3 axis now, but while I can reference the z, and x axis the y axis always overruns the reference point and hits the extreme limit. I can see the reference bit switch to 1 ...

So things went better today than anticipated I was able to enter some parameters into the 900-915 locations using this document that I found here, but I don't have it all quite perfect yet. I'm still...

I hit a major problem with the parameters. It appears that the 0900 parameters were corrupted, and it appears that these parameters could be causing my problem. The machine when booted acts like the...

I have been able to acquire a factory setup document for a Interact 316 that has the parameters in it. I put in the parameters I was certain were missing, but unfortunately I lost more of the...

At the time I was working on it I was trying to create a program to load the tool carousel, which looks like this according to my manuals.
O0001;
T0 M06;
M30;
I had that program, but it kept...

I recently acquired a Bridgeport Interact 316 with Fanuc controller. I had a corrupted part program in the machine and lost some of the parameters when I preformed the procedure to clear the program...

So an update on the machine. I have the tool changer and Z-axis working all the time now (it's warm). The tool changer was having position reading trouble, but after I blew the sensors off (some of...