I returned the whole batch that was ordered 10pcs and received new ones , these are ACT drives but with a fan inside heatsink ,
They work flawless
Type: Posts; User: danilom
I returned the whole batch that was ordered 10pcs and received new ones , these are ACT drives but with a fan inside heatsink ,
They work flawless
If anyone is interested I have a complete 0M-F 128kb control with drives
We have one italian machine PEAR and its control requires G2 and G3 codes to be output on every line which need it to be in effect.
So it treats it as non modal , and the coordinate move on next...
Hello !
Has anyone had any luck connecting to the Wantai SS880 for tuning , with their software WANT_HBS_Pro_turn ?
I have the cable which is the same as for the Leadshine and other drives, on...
Just a word of caution, on a lathe with the door opening to the right, if you open the door to take a look while the coolant is running it will splash out .
Also it will be shooting right at the...
Forgot to inform anyone reading this that the problem was low oil, no alarm on that one but it would only run the program once.
Some progress today.
I enabled Macro B trough 900 parameters , and wrote this simple macro for O9020 from looking at lots of examples around here
O9020;
G40 G80 G98 G17 G91;
G28 Z0;
T#4120...
Thanks Bill
I have a complete ladder diagram , tool change is in this order
M19 - orient spindle
M21 - Magazine right
M26 - Tool unclamp
M24 - Magazine down
rotate to right tool
M23 -...
Its Leadwell MCV-600XL with Fanuc O-MF , customized by Fong Lee Singapore . So no help from Leadwell directly.
I have backup of parameters but no diagnostic parameters or macro programs, but...
From which year is your 250c ? I service two of those and have parameters of a newer one with B3T printed, older one is with B2T control
My suggestion is also using a component for a carousel toolchanger named the same "carousel", I programmed mine for Hurco MD1 VMC in couple of hours even with needed changes for the component. Just...
Hello Gaheiras,
As I am retrofitting one Hurco like yours I can say that all your problems are with proxy sensors and they are all the same 5Vdc type, so look at the cabinet in the lower left...
It was a second operation lathe, so came with a 6 position turret, I plan on selling it. Also removed collet closer handle as I will be making a pneumatic one.
I agree its a very nice and tight...
Here are some of the renderings of what I am trying to accomplish.
http://cnc.rs/schaublin/zone/preview3%20(Small).png
http://cnc.rs/schaublin/zone/preview4%20(Small).png
As I have a full time working Mechmate cnc router, and a full parts bin, this project is about learning new stuff. Like turning and Mach3 usage on a gang tool lathe.
For this purpose, I dug out 2...
Be sure to find the right lubricant, usually its some kind that does not stick nor it makes a protective layer. Lithium grease, SKF LGWA2 for ballscrew maybe.
What are the reasons to do all of this and don't use a inductive sensor, proximity sensor? Like this...
Look if the some of MaxNC check boxes are checked in the ports and pins config, I accidentally got one once and the axis moved in only one direction :)
...
Hello,
I have not been posting here for a while.
Things changed, and I must say its a doom or something. I see everyone here who builds his machine eventually builds another one and possibly...
Thanks,
by strength I meant to ask are the carriages able to hold tight when given some force, like doing aluminium. I am still looking at the manual and videos to see how should they be properly...
Hello DonFrambach,
I have a question about linear carriages you are using. They look super simple, and since you are using them on the gantry and Z, what are its limitations in means of strenght?...
what thickness sheet metal did you use for the gantry laser cut parts?
Looks really good!
While ago I bought some engraving bits 0.2mm
I made a pcb for my new breakout board for another cnc that I have started to assemble (Mechmate)
machine did an excellent job pcb came out perfect...
Well if sag means the same as bend then that is what is happening but not from the static load (weight of gantry etc), its happening when the gantru and the Z axis are moving (rails and contruction...
Yes the machine and it's abilities are amazing, but I yet have to find a real job this machine will be used for. The prices of material and especially router bits are a killer here. As for now the...
Yes there is a bit of sag if the cutting force is great, but if you plan on cutting soft materials and doing it slow it would be ok. Supported rails would eliminate this and mounting them is the next...
I havent fitted the LEDs yet, havent bought the LED strip
but you can google some nice pictures searching "led sign acrylic"
like this one
http://www.cnclightshapes.com/PICS/sign1.jpg
Trying some plexiglass
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/mnJxiaph154&hl=en&fs=1&rel=0"></param><param name="allowFullScreen"...
Well its a kind of lathe tool its in a shape of a triangle prism and its made out of some sort of ceramic, I am no expert in this thats just what I have seen in my friends workshop
I think it would be too complicated to load the balls yourself,
you could just reverse the step direction to correct rotation (lefthand-righthand) when the ballscrews are mounted
Question to...