I know this is a very old thread, but I wanted to thank Geof for posting it. I just hooked up an air turbine spindle to my Haas and this was the clearest set of directions I could find.
Type: Posts; User: kbmyers
I know this is a very old thread, but I wanted to thank Geof for posting it. I just hooked up an air turbine spindle to my Haas and this was the clearest set of directions I could find.
Unless they did regression testing with every configuration of computer they've ever sold this would be a hard problem to discover. If they are duplicating the discs in house then they simply need...
Very nice! Could you share the details?
Mine did the same thing. Sounds like you fixed it but there is another solution as well. It isn't that the disk is bad, the problem is that your DVD drive can't read the brand of disk Tormach used...
Sorry for not having updated this old thread, but the solution I found was to try a different eBay RS485 converter. At only about $5 each, I bought a couple more from different sellers and all the...
Any suggestions on where I should look to debug this? This is the last item left to finish on this project.
Thanks,
Kent
Hello - I've been pulling my hair out trying to get Mach3 control of my Chinese 2.2kw spindle with modbus through a Hitachi WJ200. Unlike many of the threads I've read on the subject, I've gotten...
That did it! Thanks for your help. I set B090 to 10 and F003 to a one second deceleration. No heat on the resistor that I can tell. So far that is working pretty well so I don't want to push it...
Hello - I've got a Hitachi WJ200 hooked up with a 2.2kw Chinese spindle and I just added a 200W, 50 ohm braking resistor that I can't get to work right yet.
The problem seems to be with setting...
Perfect! Thank you for the information.
Kent
Hello - I'm working on the control box for a new CNC router and I'm trying to get it right the first time and avoid headaches later on.
The primary components inside the box are a Hitachi WJ200 to...
Are there any known workarounds for the "use fast painting mode" issue in SprutCam 7?
I'm using the latest build of SC 7 on a MacPro running Parallels version 8 and Windows 7 32-bit. I'm able to...
I just implemented this after the cheap original nozzle cracked on me. Thanks to the original poster for providing such an easy to follow guide. Here are a couple tips that might save the next guy...
Yes, it works with TTS
I just finished making a simple holder for my $50 eBay 200X microscope:
http://www.kentmyers.net/images/thumbnails/thumb_IMG_0004.jpg
I just use a zip-tie to hold the microscope into the holder. ...