Search:

RPM is not a problem, my spindle have a rpm range of 10k-30k because i bought it just to cut wood

do you think i can get up to 4m/min (157,5~ IPM) in rapid move and 2m/min (78,75~ IPM) in cutting move with those drivers if configurated right and 1/2 microstepping?

but TB6600 is a separated drivers, its not based on TB6560 which have 3 axis control in the same board, separated drivers have a much more reliable source of power, the datasheet for these separated...

my machine is actually 1 motor per axis, and it will be only router, i dont plan on doing plasma cutter or laser, i choose this one because have a extra driver, if one of the 3 drivers in use shows a...

i was thinking to get this one CNC Kit 4 Axis CNC Breakout Board 4 TB6600HG Stepper Driver Controller 5A | eBay ,that will be good ? i choose 4 axis, but i will use 3 axis, and if one of those...

yeah man, i was already thinking about that, i am going to purchase an bob with separated drivers to get configs right, later on i will buy an gecko g540

well, i am using a power supply with 14,4~A, but i need to buy a voltimeter to measure the voltage, related to the dip setting of TB6560 the x and y is set to 100% current and z to 50% and still Z...

i have noticed something annoying now, the x and y motors have almost zero torque, if i use my hands to try to stop the motors its stalls, but the z axis have a bigger torque, than i noticed that the...

thanks man, but for know i dont wanna invest in so much velocity because if i do i will have to change the leadscrew to a ball screw or ratchet (rack), just want to go 5m/min in rapid moves and...

can u help me find a vfd in ebay that is easier to install in mach3 or just one with manuals ? thanks in advance

i could use servo motors in the future, i dont have that type of knowlegde and money, as i have searched in ebay spindles with pwm control, they reach up to 400w only, maybe 600w, so with that in...

So, i am starting to search some good spindle to my 3 axis machine ( want to start machining metal ) and i have some doubts about it, like, can i control the speed of spindle and inverter combo in...

hey guys, sorry for reviving, just want to give some feedback, so, today i can go almost 3000mm/min ( ~118 IPM ), i think its pretty good for a TB6560 axis drivers, but i want to sell this machine...

ok guys, yesterday i had a chance to play a little bit with the machine and i changed the micro step to 1/2 and the feed was running smooth at 2000 mm/min, i didnt tested further than that, so if it...

hi, i am using a desktop cpu at the momment, i am thinking in get that bob with 3 stepper motor drivers 3 axis Stepper Motor Driver 0.2-5A controller & Breakout board for CNC Router, this bob has a...

could u give me a hand and tell me what is that BOB and where i can read about this ? would be a good help, thanks a lot man

no, currently i am using a desktop cpu, i was thinking to get a usb to parallel because the laptop could get a pulse rate much greater than the desktop that only gets 23khz~, so, i am using couplings...

Hey guys, i am having some trouble on missing steps with my cnc machine,it have 3 axes, 23nema stepper motor, tb6560 driver board and mach3 to run, so i have been reading that this driver board is...

Hey guys, this is one of the first part i machined in my 3 axis mill cnc that i was building since 3 or 4 years ago, this part is a wooden glass ( sunglasses ) made with Imbuia wood, after polishing...

thanks superman now i get it, in mach3 we have a program tab called offset where you will tell to mach3 where is the x edge of the stock and y edge of the stock (it will zero the axes , then i put...

so you use the pin to do the fixture ok that part i got it, so where do you set your home position in the drawing, because the way i see, i can use the middle of the stock as a home position so when...

hey guys, i have a generic 3 axis mill CNC, i am using mach3 to run the CNC and mastercam for g code production and i have some dificulty to think how i can flip a part and machine it getting the...

the machine gives out any warning ? what program run the cnc (ex Mach3) ?

hey guys, i have a generic 3 axis mill CNC, i am using mach3 to run the CNC and mastercam for g code production and i have some dificulty to think how i can flip a part and machine it getting the...