Search:

What we often do is send the Z2 to home before the tool change in a manual program and bring it back afterwards in another manual program.

TPS stands for tool path store. It is to be able to move away from the cut to replace a broken insert and resume from where you left off. Here is how it works. If you feed hold and switch to manual...

Daewoo Puma 200 with left and right spindles and gantry robot. We lost all parameters. We put in manually the 9000's and loaded back right and left parameters plus dgn. files from original backups....

Is the programming of a Super Quadrex using both turrets at the same time done in Mazatrol or G code. It has a fusion 640 control. We have aquired a used one but it is not installed yet.

Thanks

I would apreciate any and all opinions.

Thanks

We use a mazadisk. Small portable 3 1/2 disk drive from Mazak. Somtimes available on E-Bay. We also use Griffo Brothers (Cam link)

Need to know how to adjust X axis backlash on a Integrex 200SY with a Fusion640MT. X axis has a scale feedback not an encoder. We were able to adjust in Y axis but not sure if it is same parameters...