OK, having an Multi-L HT25G & a HT20 10TF I want to run forever, what is the "Yu Yu" software and what can I do with it that will help me keep these things running. TIA!!.
Type: Posts; User: Hitachi Newbie
OK, having an Multi-L HT25G & a HT20 10TF I want to run forever, what is the "Yu Yu" software and what can I do with it that will help me keep these things running. TIA!!.
Al,
There is zero, zip nada documentation with this machine. Can you tell me how to get to the parameters pages to copy them down? And how to find the "9000" series parameters? The machine is in...
I will gladly send them to you if you can help me out a little. I need to know HOW to get to all the parameters on the screen to copy them out. I read somewhere to "also get the 9000 series...
Hi All,
I have acquired a HT20 South Carolina built HT20 I must move very soon. It has been in a tool room infrequently used. I don't get documentation with it so making sure I don't lose memory,...
Did you ever get your Fanuc 3M-C parameters list for the Okada? I may have them.
Sent from my iPad using Tapatalk HD
Hi All,
I need to replace a worklight cover inside a lathe. The light is recessed in a box in the cover above the chuck so all I need is a rectangular flat panel cut to size with a hole pattern.
...
Hi All,
I need to replace a worklight cover inside a lathe. The light is recessed in a box in the cover above the chuck so all I need is a rectangular flat panel cut to size with a hole...
Hi All,
I need to replace a worklight cover inside a lathe. The light is recessed in a box in the cover above the chuck so all I need is a rectangular flat panel cut to size with a hole pattern....
Thanks to all who replied. Problem was a bad turret servo drive. I sent it to Precision Zone who gave it a 'rebuild'. I can't complain about the quality of work but I will say something about the...
Sorry for the gap in posts, it is tough to get to this problem regularly.
3 Parts to this error that may or may not be related.
#1: Symptoms: Please consider that the shop I bought the...
Hi All,
I am down to a couple of turret related problems so I am posting a new thread with just those. Please give a look and your advice.
Thank you
HN
Had an electrician come in who told me the power in the building was 3-phase "Corner Ground" which based on the fact that this means one of the 3 legs has zero voltage may be some of the problem. ...
Well I am embarrassed to report I found a bigger problem when testing the drive voltage. It turns out the 3 Phase power supply that was supposed to be there in the space I rented isn't actually 3...
Thanks Guys,
I will check the leads at the bottom of the Turret Drive. What am I looking for? Under what conditions do I check? To each other? To ground? With the STANDBY switch activated? ...
One alarm and a possible bad axis drive to go?
John, your phase wiring advice was spot on. Turned out the wiring in the building was incorrectly hooked up! I jogged both axes, the spindle,...
Hi John,
Very good advice I think. I have every connection incorrect (odds?). Searched the web & found out L1, L2, L3 = R0, S0 & T0. I will correct. I need to find the pneumatic settings for...
John,
Diagram says 1762-0102.
Current Alarms are:
Alarm 3000 - Servo Not Ready (this one worries me)
Alarm 3002 - Emergency - Reset Emergency Reset Button (std E-stop? When I hit or release...
I used the standby button to clear the first alarm that said "press the standby button" and cleared it. Just below were 2 more alarms that said "press the Ready button". The standby button seems to...
Sorry, trying to get the hang of the Tapatalk App & attachments. Trying again...
http://img.tapatalk.com/d/13/05/28/6uzugyny.jpg
Sent from my iPad using Tapatalk HD
I attached an image of the touchpad & keyboard if that helps in identifying where the ready button is... TIA
Sent from my iPad using Tapatalk HD
Hello Hitachis,
I just purchased my first CNC lathe, a Hitachi 1993 HT-25G with Seicos Multi-L conversational control. I will spare all the back story but the machine has relatively low hours...
Thank you for the reply.
Sent from my iPad using Tapatalk HD