Thinking about not upgrading the power supply as we are getting good holes and edge quality and just supplementing our HD plasma with a Laser. Any idea of a forum that deals with commercial lasers?
Type: Posts; User: jason_alex
Thinking about not upgrading the power supply as we are getting good holes and edge quality and just supplementing our HD plasma with a Laser. Any idea of a forum that deals with commercial lasers?
Thanks Jim, I have been wondering about where they where price wise not as bad as I thought they would be I am guessing that 225K is for a HFL015?
What type of coating is that you put on it?
Really leaning to the Burny Spirit II 400 Amp.
Hey guys,
I am looking at upgrading the plasma power supply.... so many options dose anyone have first hand experience with either the HPRXD, Spirit II, or Ultra cut XT.
Found it interesting...
Thank Jim, when I get a new controller that I can actually get into the setting of it i will give it a go. We are looking at upgrading our cnc controller in the next few months, followed by a THC...
Here are some pictures. This is in 1/4" plate running 80 Amps and 108 IPM. We are looking at upgrading the machine a step or two at a time to newer components(right at the moment we are looking at...
Sorry I was talking about $$$.
Hey guys I was wondering if anyone can give me a ballpark for a hypertherm fiber laser either HFL020 or HFL030?
Hey guys I am looking for some advice and was hoping you could help... I am trying to reduce the divot left by the plasma as it shuts off.
I have a HD 3070 with a burny 5 we are working on...
what type of mounts do you have are they bolted to the floor or are they built onto the table?
Hey guys looking at upgrading out hd3070 to the HPR style torch I was wondering if you would go with ATTC torch upgrade of if you would go with Hypertherms upgrade? I like the performance of the...
From what I understand that most of the damage done to electronics by plasma cutters is done by the high frequency of industrial plasmas that use high frequency for starting the arc so there are no...
On our system we have plasma gas and a shielding gas sorry it is H35&N2 on plasma and N2 on shield. If you have a high frequency unit you can do under water cutting knocking almost all of the smoke...
Personal I like the water tables the best because we can stick our industrial plasmas under the water knocking down the uv light, smoke, and noise. Also you can cut SS better by using an argon and...
One thought is to use copper slats .... I know its not cheep but slag dose not like to stick to it. I think Jim Colt has a video or post over it, I will try to find it tonight.
Is your problem with slag build up or all the cuts on the slats, or are your slat bending?
Thank you Jim as always a wealth of information!
This also did not take into account secondary operations based on the HPR130XD having a higher cut quality such as dross free up to 5/8"
Thank you very much Jim! And I understand there are more the the HPR thank meats the eye on a spec sheet with all the advanced features, And that the 130 can cut up to 1 1/4" production and 1 1/2"...
Did I get the wrong information off the website, or something I over looked?
Thanks for the information Jim, I did see that the new HPR130XD is rated for 110 IPM on 3/8 plate and the HD3070 with the upgrade is 105 and also that the hpr130xd is rated for production up to 1...
Hello I was wondering if anyone on the forum has done a HD3070 torch upgrade and I wanted to get your input on it. I have read all the info/stats on Hypertherms website and I was wondering if anyone...
Are you looking for break way only or torch crash sensors too?
Right now I installed the trial of SheetCam TNG and there is a post process that is for burny 2.5 same one that is used for 2.5, 3, and 5 I think they are all very similar as far as the code. Seams...
I have a Burny 3 up and running, I have the standard shapes working. Have the operators manual, Cant find the information I need...
When I load a program in it will proceed to draw it then where...
Hello all,
I currently have have a Burny 3 and 5 and have pronest 1999 I was wondering if you would recommend SheetCam over Pronest or what are some features that pronest can do that sheet cam can...
Just found the webinars on Hypertherm's website great information!!!!
I would like to take a minute and thank you for all the great information Jim Colt, I have watched several of your videos and have learned something from every one of them.
I was looking at the...
Hello again,
I was just wondering what you expect out of your CNC for tolerance, not only for the air plasma but the Hy-definition?
Air .025-.02
HD .015-.01
Just wondering about where...