When we first got the Pulsar, the drawbar was not adjusted properly as received from Novakon, so if you're using it as delivered, that could be your problem. I had to take the LDB unit off to adjust...
Type: Posts; User: jpniewski
When we first got the Pulsar, the drawbar was not adjusted properly as received from Novakon, so if you're using it as delivered, that could be your problem. I had to take the LDB unit off to adjust...
The pump on our Pulsar leaked also, and the handle broke on the pump on the Torus Pro. Bought 2 of these to replace them:
Manual Hand Pump Oiler for Bridgeport Milling Machine | eBay
So far...
Ray, I've been messing around with IP security cameras for my home for the last couple of years and have learned a lot from the various camera forums. This model:
Aliexpress.com : Buy V1 Bullet...
Thanks for the suggestion Ray. Seems the relay is the problem, or actually the relay to socket connection. Had the drives die mid cut and when I wiggled the relay, they re-energized. I'll buy a new...
Been using the mill for about a year, but recently (last 2-3 months) I'm getting an intermittent shutdown of the drives. Usually it happens at the start of a cut, but I've also had it shut down while...
I put a pair of Shars 5" on the Pulsar at work:
5" 550V CNC Milling Machine Vise 0.0004" - Vise - Toolholding & Workholding - Products
They fit pretty good, just a little big, but I don't mind...
They just delivered a new Torus Pro at work, and I have a question for anyone who has one with the new stand. The first picture shows the parts that came with the machine. 4 spacers with small...
The arbor is a Taig, 1/2" dia. x 3/8" shank. Not sure where I got the cutters from (Ebay?) but these guys have some:
High Speed Steel Plain Metal Slitting Saws Malco Saw Company
283816
Joe
279438
I put a better t-slot fence with a work stop on my chop saw. Really makes repetitive cuts easy and accurate.
Joe
Hardinge HLV-H Lathe
This website has an amazing amount of information on lathes, mills, etc. Great resource and also great reading for all who love and use machines.
Joe
I read some people using Blasocut 2000 complained it removed paint from their machines. Anyone have that problem?
Joe
Going to be getting a Torus Pro Servo mill shortly at work. For cutting aluminum, I've been using Kool Mist 78 with their misters on the small mills we have now. Has worked well up to now. But since...
I've just received a Deepgroove Taig CNC mill and was wondering if I will need a postprocessor file. I'm using Camworks and Mach3. I'm new to CNC so I hope someone can help.
Thanks,
Joe