sounds like a sticky limit switch.
Type: Posts; User: hawkins1996
sounds like a sticky limit switch.
Preferably an interact
They didn't know, said it could of been shorted when soldering on the new battery carrier
Hi, this happened to my haas, had them come out and replace the battery. The original board has the battery soldered onto them which they replace with a battery carrier so in future you can change...
Have you tried swapping the x motor with the y motor ? Sounds like it could be either motor or encoder fault!
Does anyone have any bridgeport cnc machines for sale in the UK, willing to take a look at unworking ones too!
Thanks
possible 24v power supply broken, happened to me recently
Have you checked the oil level ?
Hi, I don't have a 155 but what price you thinking of ?
Thanks
Hi, I am after bridgeport/heidenhain spares tnc, 145, 150, 151 etc.
What does everybody have ?
Hi, does it stop the function of the axis ? As we have that on one of our machines but its in the Z axis but it still functions fine.
Jack Hawkins
Hawkins Engineering Ltd
Hi, I think this may be a Bridgeport boss 5 or older, we have a boss 8 and is a lot more advanced than the one shown in the pictures.
Hope this helps.
Jack Hawkins
Hawkins Engineering Ltd
Hi, did you find a copy of the parameters ?
Hi, if its the same as ours then thats the port that plugs into the computer, you will need to buy the cable to suit, the port you need is hard to find on the new computers but you can buy a usb...
Hi,
Today at work powered up the machine as normal and 'TNC Electronics Defective I' kept flashing so turned the machine off and it carried on. I have looked in the service manual and it says...
Hi all,
I was wondering if anyone has any spare parts or know where to get any for any of the following Bridgeport's of the Heidenhain controls ?
Boss 8
TNC 131
TNC 145
TNC 150
TNC 151
100% recommend OneCNC amazing piece of kit!
Jack
I have a interact 1 mk2 with a TNC 151 control fitted. A little while back the power supply died so had to get that replaced along with some other bits but when we got in back in the work shop and re...
I have a interact 1 mk2 with a TNC 151 control fitted. A little while back the power supply died so had to get that replaced along with some other bits but when we got in back in the work shop and re...
Cant find them anywhere :(
do you still have the 145 parameters available ?
thanks
Had an error message come up on the screen and it wouldn't clear so I turned the machine off then back on now its asking to insert the paramters, which I haven't got!
Anyone got then or can anyone...