But the & symbol always appear in front of hex number in mazak controls
Envoyé de mon SM-N920C en utilisant Tapatalk
Type: Posts; User: Mat Mexico
But the & symbol always appear in front of hex number in mazak controls
Envoyé de mon SM-N920C en utilisant Tapatalk
40992 can also be a hex number.
40992 hexa will equal 264594 decimal
Envoyé de mon SM-N920C en utilisant Tapatalk
Probable memory damage. Call Mitsubishi for help. Mazak won't have a clue. They are running out of spares on this old control.
Envoyé de mon SM-N920C en utilisant Tapatalk
Is this a 640 fusion cnc control or a M32
Envoyé de mon SM-N920C en utilisant Tapatalk
Please remind me tomorrow. my email address is [email protected]
Envoyé de mon SM-N920C en utilisant Tapatalk
Use a mechanical switch plunger type but first check out your skip signal.
Proximity will not work properly.
15.000 usd for a 12.000 rpm spindle. The guys from HIGH SPEED do a lot of repair and they will certainly get you a good spindle at a fair price 5.000 to 10.000
I sent you what I have. Note that the hundred serie was running with 640T and you might have an older control but the mechanical and programming remain the same
First thing first, check the voltage of the amplifier and the one of the fourth axis. You often have issues with one being 400v and the other at 200v.
Then check your electrical diagram are most...
Mazak has a great conversational than outrun all the competitor but every single brand now offer conversational kind programming. Mori is s little expensive, haas is cheap, anything with a...
5 axis is generally an option on those machines
No need of 5 axis. You can program an xc interpolation
Send me a list of what you need (only have English versions)
If you send me a mail I'll send you the written procedure tomorrow
Use the punch option form data i/o un tape mode
Bob
I don't want to be an ass but the machine is quite old for you to find some documents of any help.
Do you have an extra drive or is this some kind of indexer? What mazak control/version is...
Apart of your program please post the corresponding tool data page
Turning interrupt is not an option because of the extremely high chip load. They rough milling then light interrupted turning for finishing
Send me an email asking for the English software and i ll forward it to you. [email protected]
New bal screw
You can even download it for free and try it for 10 or 15 days.
Buy NC PLOT for 300 usd. This software is awesome for macro development and execute 3d vectorial simulation. You can buy it online with a credit card.
But maybe the NC dies not have the ability to process smoothly
G64 might also help. G61.1 is an option on most machines
We use a Mazak variaxis i600 for aerospace parts that actually work this way but you have to set some parameters to update the toll data while running
Replace it by an USB converter.
No moving parts and it won't care about a little dust.
Plus it is actually easier nowadays to find an usb key than a 3.5 floppy disk.
You ll actually need a special M32 simulator and the number written on your scrap floppy so MITSUBISHI can issue a new one.
On a Cincinnati with 840D:
We didn´t used the floppy disk for a while and last time we used it a year ago it performed well.
Lately I've been trying to backup programs and everything is actually...
Do not edit the ladder unless you have the expertise to do so. You can hopelessly screw up the machine and/or create an unsafe condition. Be sure to make a back up copy of the present ladder. PERFORM...