Thank you for you replay to my question. I will try this steps.
Type: Posts; User: javier1
Thank you for you replay to my question. I will try this steps.
Hi is been log time since you have this problem, now I have the same problem and i need you help, how did you solve this alarm?
can you help please.
Can someone help me on solve this alarm?
Machine Niigata with Fanuc Series 15
Question on how to touch off the single thread mill & how to get the feed it is my first time that I am going to thread mill 2.625-16 UN-2B
Hi ghyman,
Thank you for you help, you are right, I went back and I click the drop down menu to pick (wear), and then show the G41 and also show the that "D" value, what happen was that I leave as...
Hi ghyman,
on this post you mentioned something that I want to know more about, when I program with a CAD/CAM and I select to use cutter comp, then when I generate the G code, I look for the G41 or...
Please help,
let see if I understand G96 with 'S' the control will read SFM? Now back the insert box they already give as the SFM they give high and low and suggest a number to use, so that is the...
Hello Tedger,
Did you still have you Hit-30? have ever have a problem with a alarm 9114 time out turret head? we have two at work with sinumerik 840c recently we have been having this issue with one...
Are this is for fanuc 15? The reason I ask is because I am new on the trade and since some time I need to do some spot face of 2.250 inch on diameter I will like to know how to use this macro....
Hello,
Please if someone can help I have a problem to get my program on the control but what is more strange is that tree months ago I run this program and now is time to use this program again,
I...
Wow thank you for save me that headache you the best(chair)
Thank you very helpful
Hi guys,
Please I need help I am start to set up this machine and I run in to problem I will guest not enough experience, any way I touch my tools (X) and (Z) on X I skim the part measure then MX...
Hi Bill,
Okay how I start to get a problems with this machine was myself and another person. We are not familiar with the controls. We started by tring to pick a program from the memory of the...
Hi every one,
okay today the machine is back on action Bill Thank you for you great help.
1984 Burgmaster with FAnuc GN11MA control.
How do i fix an alarm PS010? well I check back program O9001...
Here i am again making progress.
1 I check to see if I have a program O9001 on the memory and it wasn’t there.
2 program O9000 does not exist
3 Alarm PS076 I star getting after that all...
Hi,
Here I am I check Parameter
5001 ~ RS232C1 DVC SLCT 2
5110~ DVC1 1; DVC TYPE 4
5111 2; STOP BITS 1
5112 3: BAUD RATE 7
And I believe that the PC is set up to...
Thank you for you information I will do that
Thank you Bill
I will check all what you just point out on you e-mail. My parameter sheet print out that i have with me, I don't see Parameter #0000.
Now I want to type manually in the control...
Hi,
Help how do I save a program written on the mdi page of the haas controller?
Please help
Hi Bill,
I try to send program o9001 to the machine and i get an alarm SR591 TV error and went i check with Operation Manual have {the number of character in one block was not even} so then I try a...
Hi Bud Blackburn,
I have the same question that you have back on 2012 how programming part counter. Do you know now? can you help me?
Thank you.
Bill Thank you.
You are very helpful parameter 7071 is p6 I will let you know on Monday hows go, ones again Thank you
Hi Tedger,
I will print this page and try to fix it.
The page on the control that my co-worker when was (Tool eye calibration,) on one side of the screen have (probe dimensions [X: Radios])
What...
Hi Bill,
Thank you for quick respond, I have with me the backup programs for this machine.
Do you think this may fix the problem?
O8073 (tool change position program)
#300=1
#1=#4001
#3=#4003...
Hi Tedger,
Where I work they have same machine as you, and now we have a problem, when we touch (X) with tool eye the value on (X) in tool Geometry is off by .188 any help please how to fix it....
Hi Bill,
Thank you for you help, what of relieve.
Now if you don't may ask one more question I put on MDI to do a tool change and i get on alarm PS076 Program not found again i am on MDI
Hi hmc710,
I have an issue on how to go to screen where I can see read and punch to sent & receive programs on Fanuc GN 11 ma control Machine Burgmaster, please can you help on which step to do....
Hi hmc710,
I have an issue on how to go to screen where I can see read and punch to sent & receive programs on Fanuc GN 11 ma control Machine Burgmaster, please can you help on wish step to do....
Hi every one,
I need help with my Fanuc 11MA control, machine Burgmaster. I go to MDI type T#m06EOB input and I get an alarm PS076 program not found, ones again I am on MDI.
one more question...