Search:

@Michael,

With PowerMill you don't have to draw your part in space, you can program from 0,0,0 and then just give the NC datum (pivot datum) when posting the code.


Sent from my iPad using...

Hi Dan,

I would imagine your machine doesn't have tracking orientation. Ask your mate with Powermill to generate a datum at your trunnion table pivot point relative to your XYZ setting point and...

You have some serious problems in this post. Do you know how to modify the post? If so you need to sort out the plane switching and arc commands. If not, get a professional in.


Sent from my iPad...

If using USB


Sent from my iPad using Tapatalk

Make sure the I/O in SETTING is 17


Sent from my iPad using Tapatalk

Firstly, thanks again for your support.

The problem I have is that even live tooling is moving to the wrong position when I rotate the spindle. If I set a drill in the BT=0 Position and rotate to...

Hi,

Thanks for your reply.

I have now set a 45 degree tool at BT=0. The length of the tool is 210mm (Z) and the X axis value is 0.0. I set the edge postion P=5 and the X rad to 0.8 and the Z...

I wonder if someone can help.

A client of mine has a B300 with a Renishaw automatic toolsetter. If he sets a turning tool, no other edge positions are stored. In other words there is no offset...