My post processor spits out greater than and less than symbols to encapsulate the name of the program on the first line for my smooth Cam. Is there a way to define the less than as the start of a...
Type: Posts; User: single phase
My post processor spits out greater than and less than symbols to encapsulate the name of the program on the first line for my smooth Cam. Is there a way to define the less than as the start of a...
in my smooth Ai control there are four or five separate networks configured. i have not set up my machine to use networking yet but I know you are not allowed to change any of the network settings...
I do not know much about the 8200. However there could be some tips in my post from a few years ago. https://www.cnczone.com/forums/milltronics/364140-cad-cam-posts.html
My centurian 6 does this as well. I think it is a bias in the analog control voltage to the vector spindle drive. If that is the case, maybe it can be fixed by changing a parameter in the vector...
https://www.mmsonline.com/columns/g28-versus-g53
I used to have Hyperpost too. Open Mind took it away from me years ago.
Internal machine simulation is super fast. Are you sliding the simulation speed slider over to the right? Or better yet just clicking the jump to the end button?
The share folder does not have access to the internet and the internet does not have access to it. It is as secure as any standard folder on a Windows 10 machine.
One would have the option of...
If you are using g-code and not the conversational programming you could use NC Plot (great tool) to shift all the X and Z coordinates for the second and third tools in you g-code file. You would...
I just wanted to update everybody on my ethernet connection to my mill using a Windows 10 laptop with a built in ethernet NIC and WiFi.
It still works most of the time. I have stopped using the...
Did they want the table loaded down with vices and such for the test? Though that would not make much difference.
What is the servo auto-tune procedure like? Is it automatic?
The setup employs two separate networks. the WiFi is for connecting to your existing network. However you could do it with two NICs on the laptop.
You should be able to try it out fairly quickly.
Take a look at my dos networking post, I am having good luck with it so far. You just need a Windows 10 laptop with both a NIC and WiFi.
I can help you with it if you need too.
Cheers
SF
let us know how it goes
I have to agree Fusion 360 is unbeatable for the money. :)
We use it for lathe CAM but it has plenty of bugs. They fix some of them and others go unfixed for a year. I have been an active...
someone needs to post all the DOS network setup wizard screens to add to his thread
but I remember that you have to take out the netbeui and put in the tcpip protocol and call out the name of the...
conclusions and lingering issues
I would say this is stable enough for a home shop. The network does eventually timeout at the mill but you only have to select the menu/drive again and it wakes...
firewall settings for public and private networks
398074
set the sharing options for both the public and private networks
398068
398070
398072
set the options for the adapter that is connecting to DOS
398062
398064
398066
Share a folder with permissions to everyone. My folder is on the root and it is named share.
398058
Screen captures of the status dialog boxes
You can securely network DOS and Windows 10 together if you do it this way . . . for now.
The idea is to bring two networks together in a windows 10 PC (I will refer to this PC as the laptop), one...
That is am amazing feat Bob. I already have the SBC upgrade from Milltronics. So your upgrade does not sound worth it for just adding USB. Had this been an option three years ago I may have done...
Open mind folk were watching like a hawk and called me with the answer. Thanks Ernie.
There is a button that heals the surface selection to make it water tight. I never saw it. Once you push...
Yea I know this place is a ghost town but I thought I would post a few musings on the stock models so I can remember it.
I got $10 that says nobody posts a detailed answer here. ;)
I am using...
I agree with you, I myself have never understood why somebody would want to use any CAD other than the one they use on a daily bases. For me that is Inventor and for you it could be Solidworks. ...
Hi, welcome to our forum.
Not much traffic here though.
I do not know of any training videos other than the few on youtube. I only use it inside of Autodesk Inventor. Do you have it running...
You can run NCPlot for a week or two for free as a trial. It is very good.
Cheers