nc post processor for 5 axis haas

Hello Does some body have post processor for 5 axis milling. Haas with the treunion table. In creo original post processor for haas vf is working well for 3 axis. Now I have 5 axis and post processor don't output me A and B only x y z. but in creo the tool moves around the pieces like 5 axis.(I have selected 5 axis mode in operation ). I believe the problem is in NC post processor in creo which I don't understand it I have selected there 5 axis and save it. still don't work. Sow it easier. to get it and save it right. Please help me, or paste me some instruction.

Usually the demo post processors delivered with the cam software are 3 axis. You need a custom post processor for your needs 5 axis simultaneous with A & B axis (A=around X and B=around Y) table and head or dual head depends from the machine. Also must be defined the pivot point and many other things. The 5 axis PP costs a lot.

Ok I find it... everyting is working good. Now I must setup my vericut. how I do this. show to program that is 5 axis and add some stp files like vise and the machine and tools ?