Fanuc problem

HI
PLEASE MY CNC FANUC OM MACHINE AXIS MOVING IN JOG ALSO GOING TO REFRENCE POINTS ,ALSO SPINDEL WORK CORRECTLY ,BUT WHEN I WROT FOR EXAMPLE :
G00 X100;
TO MOVE THE AXIS
IN MDI MODE AFTER PRESSING CYCLE START KEY THAT RED LED LIGHTUP BUT
NOTHING HAPPEND TO MOVE THE X OR Y OR Z AXIS DO YOU KNOW WHAY ?

THANKS

Seems dumb but feedrate % is 0 on your rotary switch?

Most machines zero is at the maximum positive Z movement. After zero reference return, if you try to program additional positive movement, it will not go. Try G00 X-100.

Quote:

---

Originally Posted by botha.y

Seems dumb but feedrate % is 0 on your rotary switch?

---

hi:

thanks for your reply me : But Federate on the Rotary Switch is %100 But no move any axis ,my parameters was lost because Backup battery was empty
after Reentered I found this problem I think my Parametrs or Diagnostic Parameters maybe is not correct

Quote:

---

Originally Posted by txcncman

Most machines zero is at the maximum positive Z movement. After zero reference return, if you try to program additional positive movement, it will not go. Try G00 X-100.

---

Thanks for your guid, But I tried to G00 X-100 again nothing to move my parameters was lost I entered again I thing some parameters are wrong!!
what you thinking?

thanks

Quote:

---

Originally Posted by majid

hi:

thanks for your reply me : But Federate on the Rotary Switch is %100 But no move any axis ,my parameters was lost because Backup battery was empty
after Reentered I found this problem I think my Parametrs or Diagnostic Parameters maybe is not correct

---

If you uploaded your backup params and diagnostics properly I don't see why it would be this. Can you get the axis to move in G01?