1992 Haas VF1 dirve 149 spindle turning error
"1992 haas vf1" im getting a 149 spindle turning error when I run the spindle. I use to be able to clear this with a power reset. (vfd drive) when the spindle is commanded to run the run light is on and the stop is blinking with o rpm in the display even though on the haas controller ive called out for 1250. ive called haas they think its the drive? any advise whould be greatly welcome, im very frusterated at this point. also id like to get some feed back on what drives are the best to replace this one!! it curently has a durapulse gs3 in there
thank you for your help in advance
Re: 1992 Haas VF1 dirve 149 spindle turning error
Quote:
Originally Posted by
srecord1
"1992 haas vf1" im getting a 149 spindle turning error when I run the spindle. I use to be able to clear this with a power reset. (vfd drive) when the spindle is commanded to run the run light is on and the stop is blinking with o rpm in the display even though on the haas controller ive called out for 1250. ive called haas they think its the drive? any advise whould be greatly welcome, im very frusterated at this point. also id like to get some feed back on what drives are the best to replace this one!! it curently has a durapulse gs3 in there
thank you for your help in advance
Your local dealer will be able to set you up with the correct drive to use in your machine.
I have never seen a Durapulse GS3 in a Haas machine. Can you post a picture?
Re: 1992 Haas VF1 dirve 149 spindle turning error
Quote:
I have never seen a Durapulse GS3 in a Haas machine. Can you post a picture?
Me neither, that must be custom. Has the machine ran in the past with this drive? If you think it's the drive that is bad PM me and I'll set you up with the right people to rebuild your spindle drive. Pics would also be great.
Thank you,
Phil