Printable View
Anybody interested to build thin metal cutting machine?
Or Direct Metal Laser Sintering (DMLS) 3D printer?
Have Synrad Evo 240 (280W measured) for sell.
Complete with 2xRF3000 and 2x AC/DC Power Supplies and UC2000 Controller
Also another set of RF3000 and AC/DC
Do you have interest for mixed laser cutting machine? Parameters as follow:Quote:
Originally Posted by cinematic2
Seven advantages:
Can cut Galvanized sheets
Can cut mirror finished stainless steel
Oxygen consumption can be as low as 0.2 Mpa
Can keep continuous cutting
Automatic anti-collision function of laser head
American HM untouched following system
Full servo system, ball screw transmission structure
Working parameters
For stainless steel
Speed
(mm/s) Power(%) Open delay (ms) Dot Interval(s) Oxygen Mpa
0.4mm 40-50 85-95 % 400-600 400-600 0.2-0.4
0.6mm 40-50 85-95 % 400-600 400-600 0.4-0.6
0.8mm 30-50 85-95 % 400-600 400-600 0.4-0.6
1.0mm 20-30 85-95 % 400-600 400-600 0.6-0.8
1.5mm 20-30 95-98% 400-600 400-600 1.2
For Acrylic
Speed (mm/s) Power
Open delay (ms) Dot Interval(s) air
3mm 25-35 80-90% 0 0 0.2-0.4
8mm 8-15 80-90% 0 0 0.2-0.4
12mm 4-8 80-90% 0 0 0.2-0.4
20mm 1-3 80-90% 0 0 0.2-0.4
25mm
30mm
For galvanized*plate
Speed (mm/s) Power
Open delay (ms) Dot Interval(s) Oxygen
0.6mm 40-50 85-95 % 400-600 400-600 0.8-1.0
0.8mm 30-50 85-95 % 400-600 400-600 1.0-1.2
1.0mm 20-30 85-95 % 400-600 400-600 1.0-1.4
1.2mm
If interest please contact me.
Rgds
Apple
EETO Machinery Co., Ltd
Office 1401, Building B3, Wanda Plaza, Economic & Technology Development Zone, Wuhan, China
Tel：400-027-1897 Fax：027-84618501
Mobile: +86-15527861820(Whatsapp Available)
Web：www.eetomachinery.com
E-Mail：[email protected]
Skype: lovelx0226