Heidenhain Tnc 430 Post Processor
Hello everybody.
In the shop i'm working to,has been installed a 3 axis milling machine with
a HEIDENHAIN TNC 430 controller.As i read in the manual
this is not so similar with other contollers which are familliar to me(like YAZNAK FANUK OKUMA).As i use mastercam 8 for creating iso code files(G code)
i tried all the default post processors of mastercam to generate g code
but the result was pure.Is there a colleague whom i can speak with, about this matter and others like 'creation my own post processor ' for example,
and their opinion about using or not the HEIDENHAIN'S or MAZATROL's controller software for creation programs running on the corresponding controllers.(HEIDENHAIN 430 and MAZATROL NEXUS lathe milling are the kinds we have in shop).
Personally i prefer iso g code programming but there is a pushing from above
to use the specific software of the above controllers for programming.
As a new member of this forum i'd like to note that any other messages for
relevant matters are welcome.
Waiting for reply
kind regards
1 Attachment(s)
TNC 426/430 Post for Mastercam
Dear friend, I wrote a very good post for Mastercam, and I willl stay glad to share with you.My post do all drill cycles in command, helical circular interpolation, and arcs in all planes: XY/YZ/XZ.
I have tested this post extremely, so, I ensure for you that it´s a excellent post for heidenhain 426/430 systems.
If you want test, I´m putting in attach with this message.
The only problem is that was wrote for V9. I start in V8, but make some changes for V9.
Hope that helps.
If works for you, let me know.If not, let me know too.Maybe I can help you with the problem.
Read the header for additional notes, about the resources included in post.
Any doubt, contact me.If necessary, I do the changes for the post to V8 again.
Regards
Daniel
Im going to use your post
thank you for posting that post I have A guy over from Iceland and he is now using mastercamm but could not find that post.
Thank you
Quote:
Originally Posted by
CAMFUN
Dear friend, I wrote a very good post for Mastercam, and I willl stay glad to share with you.My post do all drill cycles in command, helical circular interpolation, and arcs in all planes: XY/YZ/XZ.
I have tested this post extremely, so, I ensure for you that it´s a excellent post for heidenhain 426/430 systems.
If you want test, I´m putting in attach with this message.
The only problem is that was wrote for V9. I start in V8, but make some changes for V9.
Hope that helps.
If works for you, let me know.If not, let me know too.Maybe I can help you with the problem.
Read the header for additional notes, about the resources included in post.
Any doubt, contact me.If necessary, I do the changes for the post to V8 again.
Regards
Daniel
4 AXIS HEIDENHAIN MASTERCAM V8
HI I NEED HEIDENHAIN POST TNC 430 4 AXIS MASTERCAM V8 PLEASE....
[email protected]
Re: Heidenhain Tnc 360 Post Processor
Hi... help help help : solidcam tnc 360 post prosodur... [email protected]