Extra comma

i have a techno servo post processor and it show an extra comma after each values of x , y and z
N130 Z15 .
N140 G02 x15.346 . y18.369 . R18 .

Ok, and what do you want done about ?

the cnc does not accept a comma in this position
i can provide you with my post processor(i already posted in ''share post processor " version x5 )
can we remove this commas

Yes of course, I'll have a look for you.

i have already delete the comma after each values of x y and z
but it still one more probleme
the first comma after z-6 . f190.9 (N140)
N140 G1 Z-6 . F190.9
N150 Y110.851 F381.8
N160 G3 X-314.22 Y100.851 R10.
N170 G1 X-10.128

this is my post processor
thanks

Is it the same as one you posted in share.
I've tried to duplicate the problem using your post, control and machine.
But can't get the commas.
If you make a zip 2 go and send that over?

i hope this will help

Lovely, I will have a look this evening.

Could you send me a program as a file. Cheers

ok
i thinks i have detect the source of the probleme in fact it is not an extra comma but the way of writing number
every time z change we have the probleme
as you can see in N360 G1 Z-1. F95.5 , N920 G1 Z-2. F95.5 and N 1480 G1 Z-3. F95.5 we have an extra comma but in N80 G1 Z-.5 F95.5 we supposed to have an extra one but we it is not and we have an absence zero
but for the rest we have no probleme at all
N640 G1 Z-1.5 F95.5
N1200 G1 Z-2.5 F95.5
N 1480 G1 Z-3. F95.5

you can see also in ligne N260 G3 X2.923 Y5. R2.501 and N570 G3 X38.407 Y5. R2.5 the y valuer has an extra comma also in ligne N380 G3 X38.407 Y12.195 R5. we have an extra one after R value witch is in the end that way i thought it is just a simple point in the end but it is not she is just an comma after 5

so in short if we have 0.5 we just have .5 the cnc does not accept it cause it could be any number
if we have 1 we just have 1. as well as the first
if we have 1.5 we just have 1.5 accepted
thanks

This should now fix your issue.

Cheers

.PST file on my google drive.

https://drive.google.com/file/d/0B2E...it?usp=sharing

Quote:

---

Originally Posted by azerty

ok
i thinks i have detect the source of the probleme in fact it is not an extra comma but the way of writing number
every time z change we have the probleme
as you can see in N360 G1 Z-1. F95.5 , N920 G1 Z-2. F95.5 and N 1480 G1 Z-3. F95.5 we have an extra comma but in N80 G1 Z-.5 F95.5 we supposed to have an extra one but we it is not and we have an absence zero
but for the rest we have no probleme at all
N640 G1 Z-1.5 F95.5
N1200 G1 Z-2.5 F95.5
N 1480 G1 Z-3. F95.5

you can see also in ligne N260 G3 X2.923 Y5. R2.501 and N570 G3 X38.407 Y5. R2.5 the y valuer has an extra comma also in ligne N380 G3 X38.407 Y12.195 R5. we have an extra one after R value witch is in the end that way i thought it is just a simple point in the end but it is not she is just an comma after 5

so in short if we have 0.5 we just have .5 the cnc does not accept it cause it could be any number
if we have 1 we just have 1. as well as the first
if we have 1.5 we just have 1.5 accepted
thanks

---

yes that work perfectly
thanks a lot

No problem.