Printable View
hello every body i need your help Please ! i have a big problem, with burr down i don't know how to liquidate i have an hyperthem pm 65
i work Frequently on mild steel 3 mm and put the post on 45A and air on 90 psi but burr there are on metal
i wait reply
my regard's
Hi,Hmidet.Actually Plasma for metal cutting,there is really has burr.That is can't avoid.
The different is burr little or more.I suggest you cut with fast speed,If your machine is good,only the start point and end point with burr.
If there is also has this problem,kindly turn down the plasma power then text