Antek Power Supply Wiring?

Hoping for a little help with how to wire my Antek 70v 1500W power supply to my PMDX-134. There are two sets of capacitors. Antek's website states to wire these in parallel to allow full current (each capacitor set 11A?). I'm slightly confused because each set of capacitors has screw terminals labeled "++C--". I'm not sure what the C is and I'm not sure why there are two terminals for the live and neutral wires. I know this should be simple, but I don't want to mess this up. Here is how I believe it should be wired. Could anyone confirm this:

Quote:

---

Originally Posted by groc426

Hoping for a little help with how to wire my Antek 70v 1500W power supply to my PMDX-134. There are two sets of capacitors. Antek's website states to wire these in parallel to allow full current (each capacitor set 11A?). I'm slightly confused because each set of capacitors has screw terminals labeled "++C--". I'm not sure what the C is and I'm not sure why there are two terminals for the live and neutral wires. I know this should be simple, but I don't want to mess this up. Here is how I believe it should be wired. Could anyone confirm this:

---

Groc426,

If you are connecting to J5 on the PMDX-134 your diagram is correct.

Jeff...

Jeff,

I sure am. Thank you for your quick response. I really appreciate it! I tested it out after your confirmation and works absolutely great. Thanks!

Hi
the power supply has 2 live and 2 neutral connections because the transformer has two 115v primary windings that can be wired in parallel for a 115V supply
or in series for connection to a 230V supply

the common "C" terminals are not conected in your version of power supply

John

Attachment 248018

That makes sense. Thanks! This is all a learning experience, you guys are always so great to help.