Mazak M32: Check sum error before boot

When I turn on the machine, it says "System Loading" and the green bar counts down from 100%. After about a minute or so, it says 'Check Sum Error'. The floppy drive seems to load other floppy disks fine, such as the parameter disk, so I dont think the drive is the issue.

In the book, it says for alarm "Sum Check Error" ( I dont know if Sum Check and Check Sum are synonymous) it says: "The contents of the system software have been lost." "Insert the system floppy disk into the drive once again and reload the system"

But I am trying to load the system floppy. Picture below.

Attachment 180466

Attachment 180467

Attachment 180468

Attachment 180469

Hello, today in the morning my machine woke up with the same failure like yours had. :drowning:
How could you solve that problem?

Thank you.

You will potentially have to do a wipe (dipswitches on cards) and reload everything.