Fanuc 10T Check System Label Error
Hi all,
I have a Cincinnati Milacron ACT 50D plastic mold injection machine with Fanuc Autoshot 10T.
When we change the battery and turn it on, the screen show this error:
AUTOSHOT 1A23/01 (90.02.01)
RAM TEST :END
ROM TEST :END
AUX CPU START :END
LOAD SYSTEM LABEL :END
CHECK SYSTEM LABEL :ERROR
IPL MODE
1 DUMP MEMORY
2 LOAD/VERIFY
3 CLEAR FILE
4 SETTING
5 TEST
6 END IPL
?
I have all data in another machine but I don't know how to download it to a handy file and then load it into the Cincinnati.
I've seen some procedures saying at some point to enter "Y" but this machine has only a numeric keyboard.
Thank you so much for any help in advance!
Re: Fanuc 10T Check System Label Error
Call Fanuc 1-888-326-8287
Re: Fanuc 10T Check System Label Error
On this control you have to enter '99', press INPUT, enter # of axes and then input your 9900 options in hexadecimal, cycle the power and set up the control to communicate, so you can receive the parameters.
Re: Fanuc 10T Check System Label Error
Thank you both for your answers! I will try with that options.
Re: Fanuc 10T Check System Label Error
Quote:
Originally Posted by
memoryman
On this control you have to enter '99', press INPUT, enter # of axes and then input your 9900 options in hexadecimal, cycle the power and set up the control to communicate, so you can receive the parameters.
I haven't had time to check the procedures but, how do I know what values to input for the 9900 options that memoryman said?
Can I find the 9900 values on the Setting screen?
This Fanuc control is new to me... I have been looking for the operator's and parameter manuals but I can't still find them.
Any help you can give me will be great. Thanks!
Re: Fanuc 10T Check System Label Error
Fanuc 10 Fanuc 11 Memory Backup Procedures
I met CD with manuals on eBay
in future change batteries only under power
Re: Fanuc 10T Check System Label Error
Hi
I have same problem, did you get it fixed??
i have backup parameters but cant proceed as the machine hasnt got a Y key.
Re: Fanuc 10T Check System Label Error
We are not in IPL mode any more. And we are looking the NC and PMC parameter, Do you have those? We can help each other to fix problems.