hello everybody in the cnczone
please help me to change the character "[ ]" to "( )" in my fanuc 6m model b
Printable View
hello everybody in the cnczone
please help me to change the character "[ ]" to "( )" in my fanuc 6m model b
maybe some parameter is
param 3 Bit # 3
i tried but it doesn't work
what is the explanation of parameters 00,01,02,03,04,05
PARAM_INFO BIT_NO DESCRIPTN KEY
PARAM 000 1 T/M CIRC. INTER BY RAD.
PARAM 000 2 T/M ADD 16 OFFSETS MEMORY
PARAM 000 4 T/M CSS B (ANOLOG OUTPUT)
PARAM 000 5 T/M G20/G21 SWITCHING (INCH/METRIC)
PARAM 000 6 T/M REF. POINT RET'N (2ND) 6M 0 RETURN B
PARAM 000 7 T/M REF. POINT RET'N (1ST) 6M 0 RETURN A (MANUAL,G28
PARAM 001 0 T/M G90,92/94 CYCLES 6M ADDITIONAL AXIS @SIM CONTROL
PARAM 001 1 T/M AUTO TOOL COMP. 6M ADDITIONAL AXIS CONTROL
PARAM 001 2 T/M CHAM. AND CORNER RADIUS.6M SIM. 3 AXIS CONTROL
PARAM 001 3 T/M TOOL NOSE COMP. (RAD). 6M CUTTER COMP C
PARAM 001 5 T/M MULTI CYCLES. 6M S2/4-DIGIT BCD
PARAM 001 6 T/M M.P.GENERATOR
PARAM 002 0 T/M AUTO ACCEL/DECEL. FOR FEED
PARAM 002 1 T/M STORE STROKE LIMITS 2 AND 3
PARAM 002 2 T/M RADIUS PROGRAMMING 6M F1 DIGIT FEED
PARAM 002 3 T/M STORE STROKE LIMIT 1
PARAM 002 5 T/M ** TAPE INTERFACE
PARAM 002 6 T/M INCREMENTAL OFFSETS
PARAM 003 1 T/M G10 OPTION 6M OFFSET DATA FROM TAPE
PARAM 003 3 T/M ** ISO INPUT
PARAM 003 4 T/M CLOCK DISPLAY 6M RUN HOUR DISPLAY
PARAM 003 5 T/M RAPID TRAVERSE OVERRIDE
PARAM 003 7 T/M PC MODEL B.
for 6M
PARAM 000 0 6M CIRCULAR INTERPOLATION STD G02 G03
PARAM 000 3 6M SPINDLE SPEED 12 BIT OUTPUT CSS A
PARAM 001 4 6M CUTTER COMPENSATION B
PARAM 001 7 6M TWO DIGIT DESIGNATORS T2/T4 TOOL FUNCTIONS
PARAM 002 7 6M EXTERNAL DECELERATION
PARAM 003 2 6M HELICAL INTERPOLATION
PARAM 002 4 6M THREADING AND SYNCROUS FEED
PARAM 003 0 6M PART PROGRAM CHECKING
PARAM 003 6 6M STORED PITCH ERROR COMPENSATION
PARAM 004 0 M TOOL LENGTH COMP. (G43,G44,G49)
PARAM 004 1 M TOOL OFFSET (G45,G48)
PARAM 004 2 M CANNED CYCLES B (G73,G74,G80-G89)
PARAM 004 3 M CANNED CYCLES A (G80,G81,G83,G84,G85,G86,G89)
PARAM 004 4 M CIRCULAR CUTTING
PARAM 004 6 M SND AUXILARY FUNCTIONS B-CODE 3 DIDGITS
PARAM 004 7 M REMOTE TYPE POSITION DISPLAY
PARAM 005 0 M EXTERNAL WORK NO. SELECT
PARAM 005 1 M
PARAM 005 2 M
PARAM 005 3 M TURRET INDEXING FUNCTIONS
PARAM 005 4 M FT CENTRE H ATC SPECIAL ATTACHMENT
PARAM 005 5 M FT CENTRE D/E ATS SPECIAL ATTACHMENT
PARAM 005 6 M ROBOT INTERFACE
PARAM 005 7 M NIBBLING CYCLE (WOODPECKER)