Where...again...to change from M05 to M03 ?
Hi all....
Been there....but can't remember the fix...and can't find it in the search !
When my MX7 generates the Gcode, ( post processing) it give me a stat with an M05 vs a M03
can one guide me "again" to what I'm missing / forgeting / not doing ?!?
Example....
N120 (MAX - Z2.)
N130 (MIN - Z-.25)
N140 G00 Z2.
N150 G00 X1.8081 Y2.4584 S0 M05
N160 Z.5
N170 G01 Z.25 F30.
........
Thanks, Robert
Re: Where...again...to change from M05 to M03 ?
If you look at your program....your spindle speed is ZERO (S0)
--- It is to be expected that a spindle stop (M05) be output to stop it, if it was running in a previous operation
--- no post mod required....put a spindle speed in the tooling parameters, regen, & repost
Re: Where...again...to change from M05 to M03 ?
Oh my....what an overlook!
How can one feel..!!!...well...consequence of overloading working hrs !
Thanks to reply Superman.....I’m very grateful of your intervention here....an for all others over this forum !
Many thanks in the name of MANY ! :-)