-
fanuc i reset
Is there a parameter to set the Fanuc I controller to reset to the beginning of the program from Auto mode. My Doosan will only reset to the beginning of the program from edit and I would like to change that to reset to the beginning every time reset is hit.
Thanks for your help
tony
-
Re: fanuc i reset
This has always been one of my biggest pet peeves with Doosan machines, but I have never found a Fanuc parameter that changes it. You might try posting this in the Daewoo/Doosan forum - there are a couple of real knowledgeable Doosan guys who answer questions there.
-
Re: fanuc i reset
I have been doing this for 30 years and mostly just bumped machines occasionally but this caused the worst crash I have ever had. I know I won't do it again but someone else will.
-
Re: fanuc i reset
Every Fanuc I've ever been on regardless of brand ( been a lot) won't rewind the program in auto by pressing reset. I never looked for a parameter to change it.
-
Re: fanuc i reset
I think it is possible using G08.6 (reset and rewind signal) and F0.0 (rewind signal) in PMC and parameter 3001#2 set to 1
-
Re: fanuc i reset
After pressing RESET in AUTO mode:
Select PROGRAM button
Press OPRT softkey underneath the screen
Press REWIND softkey