Hello
My Cincinnati Arrow Series 2 must have a virus on Windows NT.
The machine goes to the end, with all checkings OK and passed, and when it is going to show the working screen, Windows NT will log off to shut down.
Does anyone had this problem?
Printable View
Hello
My Cincinnati Arrow Series 2 must have a virus on Windows NT.
The machine goes to the end, with all checkings OK and passed, and when it is going to show the working screen, Windows NT will log off to shut down.
Does anyone had this problem?
You may be missing some software on your hard drive and the drive could be crashing. Take the back off of the CRT panel and look for a few lights on the main board. You can trouble shoot the problem by the small lights. You need to look in the A2100 control reference manual for trouble shooting using the lights. See the attachment I have included.
Mike cncmachineservices (dot) com
I moved some cables on the cabinet and now is working ok.
This machine has all the components siemens. But it has to many electrical parts, this machine is not reliable, it has to be more compact like the fanuc modules.
Did you look at the lights from the list that I sent you???
Mike cncmachineservices (dot) com