I am looking to buy a laser engraver/cutter

Hello All,
First time on this site

Can anyone advise / help me,

I am looking at sites, and requesting information on the products.

I am looking to buy a laser engraver/cutter with a minimum working area of
2m X 1m.

It needs to be at least 60-100w CO2 system. I want the system to have the capability to run out of the box (some assembly understood), so must have all the peripherals to run. Needs to work with windows and Coreldraw. Air assist, auto focus and red-dot pointer preferred.

If you have any advice relating what I am looking for, please email JOHN at [email protected]
I will be purchasing in approximately 4 months.
Please include shipping costs to Bournemouth, Dorset, UK BH11 8DG

Quote:

---

Originally Posted by spookie91

Hello All,
First time on this site

Can anyone advise / help me,

I am looking at sites, and requesting information on the products.

I am looking to buy a laser engraver/cutter with a minimum working area of
2m X 1m.

It needs to be at least 60-100w CO2 system. I want the system to have the capability to run out of the box (some assembly understood), so must have all the peripherals to run. Needs to work with windows and Coreldraw. Air assist, auto focus and red-dot pointer preferred.

If you have any advice relating what I am looking for, please email JOHN at [email protected]
I will be purchasing in approximately 4 months.
Please include shipping costs to Bournemouth, Dorset, UK BH11 8DG

---

Hello All,

I am tired of looking at all the sites, for US, China, etc.. and requesting information on the products. I have noticed that a lot of reps seem to monitor these threads, so here it goes. I am looking to buy a laser engraver/cutter with a rough working area of roughly 48x36, but it can give or take a little. It needs to be at least 60-100w CO2 system. I want the system to have the capability to run out of the box (some assembly understood), so must have all the peripherals to run. Needs to work with windows and coreldraw. Air assist, auto focus and red-dot pointer preferred. If you are a sales rep and think you have what I am looking for, please email me at [email protected] and compete for my business. (I will be purchasing in approximately 1 month). Please include shipping costs to Hawaii, area code 96782.

Mahalo.....


It seems that these two messages are typed by the same person...:confused:

Quote:

---

Originally Posted by spookie91

Hello All,
First time on this site

Can anyone advise / help me,

I am looking at sites, and requesting information on the products.

I am looking to buy a laser engraver/cutter with a minimum working area of
2m X 1m.

It needs to be at least 60-100w CO2 system. I want the system to have the capability to run out of the box (some assembly understood), so must have all the peripherals to run. Needs to work with windows and Coreldraw. Air assist, auto focus and red-dot pointer preferred.

If you have any advice relating what I am looking for, please email JOHN at [email protected]
I will be purchasing in approximately 4 months.
Please include shipping costs to Bournemouth, Dorset, UK BH11 8DG

---

Hello All,

I am tired of looking at all the sites, for US, China, etc.. and requesting information on the products. I have noticed that a lot of reps seem to monitor these threads, so here it goes. I am looking to buy a laser engraver/cutter with a rough working area of roughly 48x36, but it can give or take a little. It needs to be at least 60-100w CO2 system. I want the system to have the capability to run out of the box (some assembly understood), so must have all the peripherals to run. Needs to work with windows and coreldraw. Air assist, auto focus and red-dot pointer preferred. If you are a sales rep and think you have what I am looking for, please email me at [email protected] and compete for my business. (I will be purchasing in approximately 1 month). Please include shipping costs to Hawaii, area code 96782.

Mahalo.....


It seems that these two messages are typed by the same person...:confused:

YOYO
--------------------------
Good quality and service!
Wuhan gosun photoelectric technology co., Ltd
E-mail:[email protected]
Http:www.gosunlaser.com

Although I looked at this message and followed the same format I am definitely not the same person.

I am looking for a laser machine that can engrave and large pieces of glass to be used to shower doors on table tops.

I have been doing decorative sandblast for the last 15 years and I am about to retire.

Would like to purchase a machine that would help me subsidise my pension.

If you need any further info please feel free to e-mail me at [email protected]

If you would like to talk of a telephone that can be arranged.

Looking forward to your communication at your earliest convenience

Kind regards

John Noades

Bournemouth, Dorset, England.

John,

Not trying to talk you out of a laser but for the size / area you seem to want it would be far far cheaper to buy a vinyl cutter to cut the mask and a small, hand held, sand blaster to etch the glass. (a process you already know about)
From my experience laser etched glass does not look as good as sand blasted also the 'glass tube' lasers tend to suffer from 'banding' and many web pictures of laser produced work show this.

I recently etched this owl which shows the type of banding;

http://www.cooperman.talktalk.net/fi...s/image762.jpg

OK it is not that serious but, on a shower door, it might make the difference between a happy customer and one you would never see again.

Lasers are incredibly good a doing some things but, IMHO they are not too good with large areas of glass. Small areas such as glasses bottles and trophy's they seem to excel at and of course many other things that you may be able to make to supplement your retirement income.

Hope this helps a bit, all the best,

Tweakie.

Wow tweakie, great pic!

But indeed, you can see the way it raster engraved.

Tweakie beat me to it, but I would also suggest a large format plotter (vinyl cutter). It is much cheaper and produces a better result for the type of work you require.

Zax.

Thanks for all that information.

I already have a large plotter as well as sand blasting equipment.
But cannot do large extremely detailed large format or large halftone work.

I have developed a process which will allow me to achieve highly detailed line work but the method of putting the mask onto the glass is extremely expensive.

If anybody wants to see some of my work I could send some pics by email
as the file is too large to be attached to this site,

Any information eatly appreciated.

Once again thank you for taking the time to help me
Looking forward to hearing from you

Kind regards

John

Hi John,
I've send the e-mail about my suggestions to you,pls check it!
By the way,could you also send the pic of your work to me when you reply my e-mail?
It will be helpful for me to know your requests.

Tks&best regards,

YOYO

Hello John, this is Bella. I just saw the message today, don't know if you still need the laser machine now. But I would like to make some introduction of our laser machine, mail is sent to your mail box, please check.

:cheers:
Regards
Bella

Quote:

---

Originally Posted by spookie91

Hello All,
First time on this site

Can anyone advise / help me,

I am looking at sites, and requesting information on the products.

I am looking to buy a laser engraver/cutter with a minimum working area of
2m X 1m.

It needs to be at least 60-100w CO2 system. I want the system to have the capability to run out of the box (some assembly understood), so must have all the peripherals to run. Needs to work with windows and Coreldraw. Air assist, auto focus and red-dot pointer preferred.

If you have any advice relating what I am looking for, please email JOHN at [email protected]
I will be purchasing in approximately 4 months.
Please include shipping costs to Bournemouth, Dorset, UK BH11 8DG

---

Hello John,
Good morning to you. How are you today?
I am Sherry from Jinan SUKE Science& Technology CO.,LTD specialized in laser machine with more 6 years experience, & CE FDA certificate.

Do you still in need of 1*2m laser machine? or have bought ?
Later, i will send our laser machine details specification for you as reference via email [email protected] , please check it.

Please be free to contact me direclty, if any needs.

Best regards
Sherry
Email:[email protected]
Skype:sukelaser08
MSN:[email protected]
Mobile:0086-18668917435

Quote:

---

Originally Posted by spookie91

Thanks for all that information.

I already have a large plotter as well as sand blasting equipment.
But cannot do large extremely detailed large format or large halftone work.

I have developed a process which will allow me to achieve highly detailed line work but the method of putting the mask onto the glass is extremely expensive.

If anybody wants to see some of my work I could send some pics by email
as the file is too large to be attached to this site,

Any information eatly appreciated.

Once again thank you for taking the time to help me
Looking forward to hearing from you

Kind regards

John

---

Hi John，

This is Lucy from Jinan Consure Electronic Technology Co.,Ltd which is professional supplier for Laser Machine. As you mentioned, our CS1220(1200X2000mm) Laser Machine is suitable for you.

Please check your email sent from [email protected] about our CS1220 Laser Machine Price and Technical detail.

If any questions, please feel free to contact us.

Best Regards

Lucy Xiao
Jinan Consure Electronic Technology Co.,Ltd
Jinan Consure Electronic Technology Co.,Ltd [email protected]
Skype: huanjiaoxiao